rasgo-cc / Gecko-LoaderLinks
CLI and GUI utility to upload code to EFM32 microcontrollers through the UART or USB bootloader
☆19Updated 8 years ago
Alternatives and similar repositories for Gecko-Loader
Users that are interested in Gecko-Loader are comparing it to the libraries listed below
Sorting:
- ChibiOS based USB bootloader. (Outdated, see fpoussin/Motolink for examples)☆13Updated 11 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆34Updated 6 years ago
- WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader☆43Updated 5 years ago
- Arduino code for STM32 microcontrollers☆61Updated 7 years ago
- Hardware of Jasper's Electronic Load R2☆22Updated 7 years ago
- Eagle libraries pretty footprints...☆39Updated 10 years ago
- stm32f072 USB-PD standalone firmware☆17Updated 6 years ago
- Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...☆73Updated 5 years ago
- Example projects for the 1BitSy development boards.☆37Updated last year
- ESP8266 application for flashing STM8S via stm8-bootloader☆30Updated 8 years ago
- ST-Link dumper firmware☆53Updated last year
- Arduino software for an electronically controlled load, based on a STM32 microcontroller☆21Updated 4 years ago
- Oscilloscope to footswitch interface for run control using USBTMC☆19Updated 5 years ago
- Go bindings for the libjaylink library.☆10Updated 2 years ago
- CAN-BUS TO USB-UART(STM32F042)☆24Updated 9 years ago
- Arduino port for STM8S/STM8A 8-bit MCUs☆12Updated 8 years ago
- STM32F030F4P6 breakout board pcb files and example code☆14Updated 9 years ago
- KiCad Library for ESP32☆24Updated 9 years ago
- ☆28Updated 5 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆31Updated 5 years ago
- LT8910 2.4G RF arduino libraries☆25Updated 7 years ago
- Open-Source Brushless Drive Controller Firmware☆26Updated 12 years ago
- Serial bootloader for STM8 microcontrollers☆98Updated 7 months ago
- network connected ws2812 led-controller on a stm32f103 processor.☆31Updated 10 years ago
- ☆19Updated 5 years ago
- Documentation for retrieval/recovery of corrupt ST-Link/V2 firmwares for both the standalone and embedded ST-Link in-circuit programmer/d…☆30Updated 12 years ago
- 8051 microcontroller☆40Updated 7 years ago
- Non DMA version of the spi_master driver with ILI9431&ILI9488 example☆37Updated 8 years ago
- WCH-LinkW is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V a…☆23Updated last year
- Resources for MightyWatt R3 electronic load☆31Updated last month