publiclab / spectrometer3
Public Lab's open source Desktop Spectrometry Kit
☆12Updated 8 years ago
Alternatives and similar repositories for spectrometer3:
Users that are interested in spectrometer3 are comparing it to the libraries listed below
- Soundcard Oscilloscope SW☆24Updated 9 years ago
- SAMD21G18A Sensor Board☆15Updated 8 years ago
- Constant current source for driving LEDs and lasers up to 4A with with PWM capabilities and 3 integrated low power switching drivers.☆14Updated 8 years ago
- Affordable and precise XY and Z movement platform for scientific experimentation☆11Updated 8 years ago
- Neopixel Joints, millable on the Othermill☆27Updated 7 years ago
- Nano-Sized ATtiny85 devboard with USB Bootloader☆90Updated 8 years ago
- CNC machine control modules with Toslink optical cables☆27Updated 8 years ago
- Building 3D Printers from E-Waste☆24Updated 9 years ago
- ☆11Updated 2 years ago
- CNC laser cutter controller, compatible with LaserSaur but better.☆20Updated 12 years ago
- An Arduino based Spot Welder for battery welding☆44Updated 8 years ago
- Branch of Grbl 0.9G provides planned spindle control for lasers☆10Updated 8 years ago
- Code for a single RGB color sensor camera. Uses the Adafruit RGB Color Sensor (TCS34725) and two BYJ48 Stepper motors☆17Updated 6 years ago
- 3D-printer plate generator☆69Updated 9 years ago
- 3D Printable DLP 3D printer☆47Updated 7 years ago
- Cordwood-style blinky ring, powered by an ATtiny85 and a pair of size 10 Zn-air hearing aide batteries.☆38Updated 6 years ago
- Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi☆18Updated 4 years ago
- Pawn scripting language for the DSO Quad pocket oscilloscope.☆76Updated 3 years ago
- ☆46Updated 8 years ago
- ☆23Updated 9 years ago
- Andy's Workshop Reflow Oven Controller☆33Updated 7 years ago
- PSoc5 Port of Grbl CNC Controller☆36Updated 8 years ago
- Open Exposer - Hardware, Slicer, Host, Firmware☆67Updated 8 years ago
- Eagle scripts for LED matrix display generation☆14Updated 2 years ago
- SparkFun's adaptation of the FreeSoC project.☆16Updated 6 years ago
- Inkscape extension for creating optical rotary encoder discs☆52Updated 4 years ago
- CNC (Grbl) controller for a Raspberry Pi with 480x320 touchscreen☆24Updated 6 years ago
- This is a Kalman filter used to calculate the angle, rate and bias from from the input of an accelerometer/magnetometer and a gyroscope.☆14Updated 9 years ago
- This is a port of GRBL 1.1 to STM32F103 target☆9Updated 7 years ago
- Arduino feat. Processing Laser CNC Project☆67Updated 2 years ago