ppisa / rpi-utils
Utils and configurations for Raspberry Pi - Root Overlay and Aufs setup, SDcard image manipulation etc.
☆37Updated 5 years ago
Alternatives and similar repositories for rpi-utils
Users that are interested in rpi-utils are comparing it to the libraries listed below
Sorting:
- U-Boot for Kirkwood Devices☆47Updated 3 years ago
- ☆118Updated 3 years ago
- Hostapd driver for RTL8188{C|CU|CUS} wifi chips.☆177Updated 5 years ago
- Linux kernel source tree☆26Updated 7 months ago
- Public fork of the Linux kernel source tree☆31Updated 4 years ago
- C code to decode the Revision: field of /proc/cpuinfo on the Raspberry Pi☆33Updated 3 months ago
- ☆67Updated 2 years ago
- NCT5104D GPIO Linux Driver☆13Updated last year
- Modular GPIO interface☆104Updated 8 months ago
- Configure Netgear ProSafe Plus Switches on linux☆137Updated last year
- Faifa can configure any Intellon-based Power Line Communication device using Intellon INT5000 and INT6000 series chips (6000 and 6300 chi…☆63Updated 4 years ago
- A Linux kernel SPI-driver for the RFM12B and RFM69CW RF modules by HopeRF☆114Updated 2 years ago
- Script for compiling, patching and packing hostapd from sources☆46Updated 7 years ago
- Controlling different relay cards for home automation with a Linux software☆84Updated 2 years ago
- Debian image creator for Turris Omnia board☆29Updated last year
- Script to build a minimal Debian sd card image.☆75Updated 6 years ago
- Userspace library to access APU2/3 gpios☆21Updated 2 years ago
- Experimental fork of Allwinner xradio driver☆15Updated 2 years ago
- Pine64 U-Boot with patches to compile and boot fixed BSP Kernel in a sensible way☆50Updated 8 years ago
- Some scripts to build and install the Realtek 8192cu driver via dkms, with concurrent mode enabled, allowing simultaneous AP and client m…☆38Updated 3 years ago
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago
- Debian + Mainline Linux Kernel + u-boot. Bootstrap Script and Tutorial for RPi2/3.☆51Updated 6 years ago
- contains the files to build the https://wiki.debian.org/RaspberryPi3 image☆127Updated 5 years ago
- project to package the swconfig utility from OpenWRT for Debian and derivatives☆16Updated 9 years ago
- configure your openwrt system(s) using ansible!☆67Updated 8 years ago
- Simple script to set CPU parameters such as governor and frequencies for your XU3 (and possible XU4)☆56Updated 7 years ago
- Control the power settings for a USB hub☆61Updated 2 years ago
- ☆89Updated last year
- jpnevulator is a handy serial sniffer. You can use it to send data on a serial device too. You can read or write from/to one or more seri…☆122Updated 3 years ago
- ☆120Updated 2 years ago