polykit / eurorack-psuLinks
Eurorack Power Supply +12V -12V +5V
☆26Updated 4 years ago
Alternatives and similar repositories for eurorack-psu
Users that are interested in eurorack-psu are comparing it to the libraries listed below
Sorting:
- A Eurorack drone module with 4 oscillators and multiple modulation options☆12Updated last year
- QUATRO is a quad VCA and mixer based on Veils, by Mutable Instruments. Original design by Émilie Gillet - CC BY-SA 3.0. Through-hole remi…☆23Updated 3 years ago
- ☆12Updated 4 years ago
- 4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.☆52Updated 7 months ago
- Kicad schematics and PCB layout for an 8 channel ADSR based on CEM3310/AS3310☆13Updated 3 years ago
- Tuna - Eurorack tuner module☆14Updated 3 years ago
- Eurorack sequencers based on the arduino nano☆11Updated 5 years ago
- A DIY Throughhole variant of the Mutable Instruments Branches☆16Updated 2 months ago
- A MCP4821 version of Hagiwo Quantizer☆18Updated 4 years ago
- A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.☆43Updated 2 years ago
- PCB converion of the HAGIWO envelope follower module.☆16Updated 3 years ago
- eurorack open source kicad from Mutable SHADES☆12Updated last year
- 4hp DIY eurorack line and headphone output module based on the Nearness and AJH headphone amp modules☆27Updated 3 years ago
- MIDI to 8 digital outputs☆22Updated 9 months ago
- ☆19Updated 2 years ago
- An Echo/Delay Module for Eurorack, based on the PT2399☆12Updated 2 years ago
- Through hole PCB version of the HAGIWO 005 Generative Sequencer Eurorack module.☆30Updated 2 years ago
- Front panel for Braids eurorack module☆16Updated 4 years ago
- EasyEi8ht is a minimalist eight channel performance-oriented trigger sequencer☆35Updated 4 years ago
- MS20-VCF clone based on BartonSynth version.☆19Updated this week
- 7-phase quadrature sine LFO for eurorack☆12Updated 6 years ago
- DOTS eurorack module pcb schematics and code ATMega328 based☆25Updated last month
- A Eurorack DCO module based on the DCO core of the Roland Juno 106☆29Updated 2 years ago
- 8-Step Sequencer Eurorack Module with 3 individual CV outputs☆22Updated 2 years ago
- Full featured kick drum inspired by Thomas Henry's Bass+☆11Updated 3 years ago
- A multi-stage phase shifter in Eurorack format with up to 12 stages selectable☆24Updated 5 months ago
- Arduino based Clock Divider☆18Updated 9 months ago
- OTA VC Filter Module in Eurorack Format☆14Updated 2 years ago
- PCBs and panels for A Mutable Instruments Peaks clone built with code from $peaks☆43Updated 3 months ago
- Through-hole 4HP PCB version of the HAGIWO distortion eurorack module☆18Updated 2 years ago