pololu / zumo-shieldLinks
Arduino libraries for the Pololu Zumo Shield and Zumo robot kit for Arduino. (deprecated; replaced by https://github.com/pololu/zumo-shield-arduino-library)
☆104Updated 7 years ago
Alternatives and similar repositories for zumo-shield
Users that are interested in zumo-shield are comparing it to the libraries listed below
Sorting:
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆114Updated 5 years ago
- Pololu Maestro Servo Controller library for Arduino☆46Updated 4 years ago
- Arduino library for Pololu LSM303 boards☆146Updated 3 years ago
- A Library of Libraries of Sensors. Infrared, Ultrasonic, Compass and many others, ready to work with ArduinoThread and fully object orien…☆57Updated 4 years ago
- Ultrasonic HC-SR04 library for Arduino IDE☆176Updated 9 years ago
- Arduino program for building an AHRS with a Pololu MinIMU-9☆141Updated 4 years ago
- Python library and design files for the RasPi Robot Board V3☆69Updated 7 years ago
- ESP8266-based, Blynk-compatible, beginner-friendly programmable WiFi development board.☆23Updated 5 years ago
- ESP8266 Oled Display☆87Updated 10 years ago
- Design files and firmware files for the RedBot robotics board.☆23Updated 7 years ago
- ☆41Updated 7 years ago
- Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.☆151Updated 11 years ago
- Inverse kinematics control library for Phenoptix meArm☆122Updated 5 years ago
- Combination of MPU-9250 and BMP180, I2C device selectable.☆35Updated 10 months ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆83Updated 8 years ago
- Take raw IR signal from a remote receiver and print out pulse lengths☆165Updated last year
- The MicroView is a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics☆58Updated 4 months ago
- Monster Moto Shield available from SparkFun Electronics.☆30Updated 5 years ago
- Unified sensor driver for the Adafruit 10DOF Breakout☆28Updated 4 years ago
- Segway-like robot implemented on ESP8266☆120Updated 4 years ago
- An open-source and fully hackable biped robot.☆161Updated 9 years ago
- Eddie the Balance Bot☆63Updated 8 years ago
- Arduino library for the SparkFun Micro OLED - a breakout board for a monochrome, 0.66", 64x48 OLED display.☆83Updated 4 months ago
- Library to help interface with the on-board hardware of the Pololu Zumo 32U4 robot.☆68Updated last year
- Unified sensor driver for Adafruit's BMP085 & BMP180 breakouts☆94Updated 2 years ago
- ☆35Updated 9 years ago
- Arduino library supports many HC-SR04 sensors via I2C bus and hardware interrupt☆27Updated 8 years ago
- Pololu A-Star software and drivers☆57Updated 3 years ago
- ESP8266-based Quadcopter Brain☆93Updated 9 years ago
- Otto's Calibration Tool☆12Updated 2 years ago