pololu / balboa-32u4-arduino-library
This is a C++ library for the Arduino IDE that helps access the on-board hardware of the Balboa 32U4 control board.
☆13Updated 2 years ago
Alternatives and similar repositories for balboa-32u4-arduino-library:
Users that are interested in balboa-32u4-arduino-library are comparing it to the libraries listed below
- An Arduino library that helps establish I2C communication between an A-Star 32U4 Robot Controller and a Raspberry Pi, with the Arduino ac…☆30Updated 4 years ago
- Library to help interface with the on-board hardware of Pololu A-Star 32U4 controllers.☆16Updated 4 years ago
- Arduino Library for Adafruit LIS3DH breakout board☆74Updated 8 months ago
- Arduino library for the MCP9808 sensors in the Adafruit shop☆45Updated last year
- ESP32 Thing-compatible board using the WROOM module and a QWIIC connector.☆20Updated 2 years ago
- SAMD21 Development Board with LoRa and GPS☆36Updated 6 years ago
- Arduino library driver for Adafruit's I2C-Based FRAM Breakouts☆45Updated last year
- A data logger example using the MPU9250 accelerometer and a ESP8266 Wi-Fi Radio. This example works best with IoT Pipe (www.iotpipe.io).☆19Updated 8 years ago
- Arduino library for scientific sensor readings/fusions/manipulations☆34Updated 8 months ago
- find everything to do for the PiMag robot Tiny, including the design & software files☆15Updated 8 years ago
- Adafruit 16-Channel PWM Servo Driver PCB Eagle Files☆63Updated 5 years ago
- Software for controlling and analysing T-Bots (Balancing robots)☆31Updated 10 months ago
- My Arduino Classes☆14Updated 10 years ago
- Arduino library to support the LSM6DS3 3D accelerometer and 3D gyroscope☆22Updated 3 years ago
- print out the low-level configuration registers for the Arduino Zero (and similar boards)☆24Updated 4 years ago
- Driver for Adafruit's SPI-Based FRAM Breakouts☆36Updated 6 months ago
- Simple C++ library to parse U-Blox Neo M8N strings.☆30Updated 2 years ago
- Arduino library for sending data to MegunoLink visualisers and useful components☆46Updated 4 months ago
- Pololu A-Star software and drivers☆57Updated 2 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆81Updated 7 years ago
- A cross-platform GUI for uploading new firmware to an Artemis based device.☆28Updated 3 weeks ago
- ☆50Updated 8 years ago
- Pololu Maestro Servo Controller library for Arduino☆43Updated 4 years ago
- Unified driver for the ADXL345 Accelerometer☆128Updated 11 months ago
- http://www.adafruit.com/products/746☆26Updated 3 years ago
- Arduino library for the MMA8451 Accelerometer sensors in the Adafruit shop☆24Updated last year
- Three Ultrasonic sensors connected to a ATtiny and connected through I2C☆16Updated 8 years ago
- Arduino Library for Adafruit MAX31856☆24Updated last year
- PCB files for the Adafruit FONA 808 Breakout☆16Updated 5 years ago
- DMA helper/wrapped for ATSAMD21 such as Arduino Zero & Feather M0☆59Updated last year