patomoi / ATS-20-Starter-PackLinks
a starter pack for ATS-20 Users
☆24Updated 3 years ago
Alternatives and similar repositories for ATS-20-Starter-Pack
Users that are interested in ATS-20-Starter-Pack are comparing it to the libraries listed below
Sorting:
- ATS-20 radio schematic☆34Updated 3 years ago
- A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and au…☆95Updated this week
- Hamradio SDR transceiver software☆79Updated 8 months ago
- ☆61Updated last year
- A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super exte…☆85Updated 2 years ago
- Digital controlled radio frequency oscillator based on Raspberry Pi Pico (1 Hz to ~32.333 MHz band). RTTY, MFSK, freq sweep examples are …☆67Updated last year
- Fork of https://github.com/aa1gd/pico_ft8_xcvr project from AA1GD. Real-time FT8 decoding on Raspberry Pi Pico.☆25Updated 3 years ago
- Open firmware for all versions of the uSDX transceiver☆106Updated last month
- A controller for a multi-band homebrew SSB/CW transceiver, targeting Arduino Nano and si5351 PLL.☆70Updated 2 years ago
- ☆62Updated 5 years ago
- Improved antuino software☆46Updated 6 years ago
- OpenCW Keyer MK2 hardware files☆29Updated 6 years ago
- Expansion board for Raspberry PI allowing to use coaxial SMA output instead of direct wire connection to GPIO to connect radio equipment …☆34Updated 9 months ago
- ☆32Updated last year
- A standalone FT8 transceiver based on the Raspberry Pi Pico microcontroller by Godwin Duan, AA1GD.☆33Updated last year
- Using an ESP32 and OLED with a basic microphone to decode Morse Code live to the display☆57Updated 3 years ago
- Weak Signal Propagation Reporter on a breadboard☆47Updated 3 years ago
- ☆40Updated 4 years ago
- Very simple Arduino nano and SI5351 GPSDO using the PPS from a GPS receiver☆29Updated 3 years ago
- An Arduino APRS Tracker☆71Updated last year
- ☆30Updated last year
- WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.☆146Updated last year
- A pocket sized FT8 Transceiver utilizing Teensy 3.6, Si4735 and Si5351 technology.☆61Updated 4 years ago
- send pocsag messages inside RF22 on si4432-based ISM modules☆40Updated 11 years ago
- A FreeDV device based on the ESP32.☆105Updated 11 months ago
- All HF bands QRP CW/SSB transceiver☆69Updated last year
- Ham radio transceiver QRPp based on Raspberry Pi☆42Updated 5 years ago
- This is a C++ implementation of KISS TNC software for Arduino☆31Updated 3 years ago
- Fork of LibAPRS for the ESP8266☆33Updated 8 years ago
- NanoVNA mod for stable and precise measurements☆28Updated 5 years ago