Alternatives and similar repositories for freeds:

Users that are interested in freeds are comparing it to the libraries listed below

• jesusrop / esphome_huawei_sun2000
  Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU
  ☆50Updated 2 years ago
• iqas / derivador
  Derivador de excedentes para inversores solares
  ☆16Updated 4 years ago
• syssi / esphome-solax-x1-mini
  ESPHome component to monitor a Solax X1 mini via RS485
  ☆39Updated last month
• pawelka / sofarsolar_esp_rs485_logger
  ☆58Updated last year
• gurues / PowerMeterDIY
  ☆9Updated 3 years ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆83Updated last month
• mletenay / home-assistant-pylontech
  Home Assistant custom component for Pylontech (high voltage) BMS accessed via console
  ☆17Updated 9 months ago
• txubelaxu / esphome-jk-bms
  ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…
  ☆41Updated 2 weeks ago
• epiclabs-uc / esphome-modbus-server
  ESPHome Modbus Server component
  ☆43Updated last year
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆23Updated 2 months ago
• nikito7 / edpbox-dev
  Modbus to WiFi dev
  ☆41Updated last month
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆82Updated last week
• catalinbordan / docker-voltronic-homeassistant
  Programmatically read data from your Voltronic, Axpert, Mppsolar PIP, Voltacon, Effekta etc Inverter and send it to Home Assistant via MQ…
  ☆29Updated last year
• alcar21 / WemosEM
  Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
  ☆116Updated 3 years ago
• klatremis / esphome-for-deye
  Esphome component for Deye 3 phase inverters for Home Assistant
  ☆162Updated 3 months ago
• syssi / esphome-pipsolar
  ESPHome component to monitor and control a pipsolar inverter via RS232
  ☆120Updated last month
• BartGijsbers / CN105Gateway
  ESP32 based MQTT gateway for the CN105 protocol based Mitsubishi Heat Pumps (FTC5)
  ☆29Updated 3 years ago
• CJNE / ha-sunspec
  Home Assistant customcomponent for SunSpec modbus devices
  ☆68Updated 5 months ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆181Updated 6 months ago
• Emilv2 / huawei_solar
  Home Assistant custom component for Huawei inverters
  ☆179Updated last year
• MindFreeze / hassio-axpert
  Hassio addon to monitor voltronic axpert inverters through USB
  ☆28Updated 3 months ago
• jantenhove / GoodWeLogger
  ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics
  ☆95Updated last year
• blakadder / nspanel
  Sonoff NSPanel protocol and hacking information. Tasmota Berry driver for NSPanel
  ☆136Updated 7 months ago
• WilbertVerhoeff / Growatt
  Growatt ShineWifi modbus with ESPHome code to run native in Home Assistant
  ☆31Updated 9 months ago
• syssi / esphome-smg-ii
  ESPHome configuration to monitor and control a ISolar/EASUN SMG II inverter via RS232
  ☆91Updated last month
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆142Updated 2 years ago
• john30 / ebusd-esp
  Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
  ☆154Updated 9 months ago
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆44Updated last year
• patman15 / BMS_BLE-HA
  This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.
  ☆118Updated this week
• stefanbode / Sonoff-Tasmota
  Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options
  ☆126Updated 3 months ago