Alternatives and similar repositories for OBD-LCD-display-for-PSA

Users that are interested in OBD-LCD-display-for-PSA are comparing it to the libraries listed below

• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆66Updated last week
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆48Updated 3 months ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆96Updated last year
• olegel / CANLogger
  CAN bus logger and analyser tool
  ☆63Updated 6 years ago
• dvjcodec / SCG-ECU-2.0-STM32F407-8x8
  Standalone ECU designed for Speeduino and RusEFI firmware.
  ☆40Updated last year
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆65Updated 3 years ago
• autowp / CANreader
  Android CAN client
  ☆61Updated 7 years ago
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆19Updated last year
• HeinrichG-V12 / E65_ReverseEngineering
  ☆42Updated 3 years ago
• xerootg / esp32_tp20_datalogger
  VW TP 2.0 Datalogger for the ESP32
  ☆19Updated 2 years ago
• an-ven / VW-Instrument-Cluster-Controller
  Arduino and MCP2515 CAN bus VW Instrument Cluster Controller
  ☆42Updated last year
• domnulvlad / KLineKWP1281Lib
  Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)
  ☆57Updated 8 months ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆38Updated last year
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆53Updated 4 years ago
• ludwig-v / arduino-psa-diag
  Arduino sketch to send UDS / KWP diagnostic frames over CAN-BUS to PSA/Stellantis cars (Peugeot, Citroen, DS, Opel)
  ☆169Updated last month
• muki01 / I-K_Bus
  BMW I/K Bus Control with Microcontrollers like ESP32, Arduino
  ☆25Updated last week
• ericmaas / speeduino
  EMS boards powered by Speeduino
  ☆12Updated 6 months ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆58Updated 6 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆95Updated 3 years ago
• adamforbes92 / FISCuntrol
  FIS Control for the masses.
  ☆48Updated 6 years ago
• notchum / OBD_Gauge
  An Arduino-powered automotive gauge using OBDII.
  ☆10Updated 3 years ago
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆39Updated 2 months ago
• joseshiru / PyroNode
  open-source ESP32-based control system designed to manage multiple outputs, monitor temperature, and provide robust control over external…
  ☆16Updated 9 months ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆39Updated last year
• kmalinich / dieslg8
  Arduino Uno + Seeed Studio CANBUS + BMW M57 diesel
  ☆42Updated 3 years ago
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆15Updated 8 years ago
• Bylund / Knock-Shield-Example
  Example code compatible with the Knock Shield for Arduino.
  ☆14Updated 5 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆115Updated 9 months ago
• Tjeerdie / SPECTRE
  Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.
  ☆50Updated last year