Alternatives and similar repositories for SmartPi

Users that are interested in SmartPi are comparing it to the libraries listed below

• roarfred / MBusMqttLogger
  An M-bus master that poll a meter and logs data to an MQTT server
  ☆52Updated 9 years ago
• openenergymonitor / HeatpumpMonitor
  Open-source Heatpump Monitor
  ☆78Updated last year
• reaper7 / SDM_Energy_Meter
  reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)
  ☆260Updated last year
• heliflieger / a-culfw
  Alternative culfw
  ☆127Updated 3 years ago
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆74Updated 6 years ago
• hiveeyes / arduino
  Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.
  ☆49Updated 2 years ago
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆148Updated 4 years ago
• OpenEVSE / ESP8266_WiFi_v2.x
  ESP8266 WiFi for OpenEVSE Version 2.x
  ☆80Updated last year
• crjens / PiPowerMeter
  Raspberry Pi Power meter
  ☆90Updated 4 years ago
• gonium / usb-iso-rs485
  ☆15Updated 8 years ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆83Updated 3 years ago
• openenergymonitor / emonpi
  Raspberry Pi Based Energy Monitor. Hardware, Firmware & related software for the PI.
  ☆278Updated 3 months ago
• mysensors / NodeManager
  Plugin for a rapid development of battery-powered sensors
  ☆135Updated 3 years ago
• openenergymonitor / EmonESP
  ESP8266 WIFI serial to emoncms link
  ☆169Updated 2 years ago
• puuu / MQTT433gateway
  MQTT 433.92 MHz radio-frequency device gateway
  ☆137Updated 3 years ago
• peninquen / Modbus-Energy-Monitor-Arduino
  A class to collect data from a energy monitor that uses modbus protocol.
  ☆47Updated 5 years ago
• ph2lb / LoRaWAN_TTN_Env_Node
  BME280 and Adruino ProMini based enviromental node with LMIC ABP.
  ☆36Updated 7 years ago
• jaminNZx / Tracer-RS485-Modbus-Blynk
  An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.
  ☆67Updated 6 years ago
• rkoshak / sensorReporter
  A python based service that receives sensor inputs and publishes them in various ways.
  ☆107Updated last month
• InfernoEmbedded / PowerScraper
  A scraper for power devices to feed data to OpenEnergyMonitor
  ☆37Updated 9 months ago
• bertmelis / VitoWiFi
  Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32
  ☆140Updated last month
• jantenhove / GoodWeLogger
  ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics
  ☆100Updated 2 years ago
• letscontrolit / ESPEasyPluginPlayground
  Plugin ideas, concepts, user contributed, etc
  ☆195Updated last year
• UnipiTechnology / evok
  The API of Unipi controllers
  ☆104Updated 4 months ago
• alekslt / HANToMQTT
  ESP32/ESP8266 HAN (M-Bus Metering Data) to MQTT
  ☆40Updated 4 years ago
• Aypac / Arduino-TR-064-SOAP-Library
  Arduino library for the TR-064 protocol, most commonly used by the Fritz!Box router API
  ☆68Updated last year
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆131Updated 4 years ago
• openenergymonitor / emonhub
  Python service linking and decoding input to MQTT & Emoncms
  ☆103Updated last month
• piotrC4 / mqtt-ir-transceiver
  ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)
  ☆144Updated 5 years ago
• KinDR007 / Victron-MPPT-ve.direct-to-MQTT
  Read data from victron mppt and transport to mqtt server
  ☆43Updated 3 years ago