Alternatives and similar repositories for fileslauncher

Users that are interested in fileslauncher are comparing it to the libraries listed below

• yasko-pv / gw-ev
  A BMS communication bridge between GoodWe GW6000-EH inverter and EV battery (Chevy Volt).
  ☆12Updated 4 years ago
• ClassicDIY / PylonToMQTT
  Reads data from the Sage BMS console port and publishes to MQTT
  ☆26Updated 3 months ago
• diyless / esp32-wifi-thermostat
  ESP32 OpenTherm Wi-Fi Thermostat
  ☆55Updated last year
• rand12345 / solax_can_bus
  ☆16Updated 2 years ago
• plapointe6 / HAMqttDevice
  A library that provides tools to simplify MQTT discovery implementation for Home Assistant to your device.
  ☆47Updated 8 months ago
• olegv142 / esp32-eth-serial
  ☆12Updated 10 months ago
• BlackSmith / GFSunInverter
  ESP32 library for GridFree SUN-2000G invertor.
  ☆17Updated 2 weeks ago
• Xinyuan-LilyGO / T-CAN485
  ☆130Updated 2 months ago
• atc1441 / NETSGPClient
  Arduino Interface for cheap 2.4ghz RF enabled Solar Micro Inverters
  ☆65Updated 2 years ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated last year
• Zeppelin500 / MBusinoLib
  Arduino M-Bus decoder
  ☆13Updated last week
• WolfgangFranke / ESP32_remote_longterm_logging
  Automatic long-term logging for remote ESP32 IoT devices, by the Web Browser or an CURL script
  ☆14Updated 5 years ago
• vagueDirector / ArduinoXiaoxiangSmartBMSDisplay
  Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display
  ☆21Updated 4 years ago
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆56Updated 3 weeks ago
• syssi / esphome-daly-bms
  ESPHome component to monitor a DALY Battery Management System (DALY-BMS) via BLE
  ☆20Updated last week
• neilsheps / overkill-xiaoxiang-jbd-bms-ble-reader
  Read Xiaoxiang BMS data through BLE on Adafruit nrf52 devices
  ☆18Updated 2 years ago
• justinschoeman / dalybms
  Interface layer for Daly Smart BMS
  ☆19Updated 3 years ago
• bres55 / Smart-BMS-arduino-Reader
  ☆62Updated 6 years ago
• SensorsIot / Humidity-Sensors
  ☆10Updated 3 months ago
• openshwprojects / OpenBK7231T
  SDK used to build my Tasmota replacement for BK7231T platform
  ☆128Updated last month
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆62Updated last week
• mrk-its / esphome-canopen
  ☆34Updated last month
• FurTrader / Overkill-Solar-BMS-Arduino-Library
  Just the Arduino Library for Overkill Solar BMSs
  ☆36Updated 2 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆33Updated 3 months ago
• pvvx / TLB2Z
  Low cost BLE Advertisements Repeater into Zigbee on TLRS825x
  ☆40Updated 10 months ago
• epiclabs-uc / esphome-modbus-server
  ESPHome Modbus Server component
  ☆45Updated last year
• Jeroen88 / EasyOpenTherm
  OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microc…
  ☆70Updated 2 years ago
• xmow49 / ESP32H2-SmokeDetector
  ☆18Updated last year
• mrk-its / can2mqtt
  ☆47Updated last week
• iphong / ha-config
  My Home Assistant build configuration file
  ☆23Updated 4 years ago