mobilinkd / uv-k6-digital-mod
UV-K6 Mods for Digital Modulation
☆49Updated 8 months ago
Alternatives and similar repositories for uv-k6-digital-mod:
Users that are interested in uv-k6-digital-mod are comparing it to the libraries listed below
- Open source firmware for NiceRF SA8x8 allowing arbitrary digital radio protocols☆41Updated 2 months ago
- A modified version of https://github.com/egzumer/uv-k5-firmware-custom for use with the QuanshengDock app☆101Updated last year
- A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and au…☆78Updated 2 weeks ago
- Radtel RT-890 Open Firmware☆50Updated last year
- A SDR PCB project base on msi2500 and msi001☆58Updated 3 years ago
- Based on Radioberry designd by" https://github.com/pa3gsb/Radioberry-2.x"☆71Updated last year
- Raspberry pi SDR tranceiver using lvgl gui☆104Updated this week
- Arctic Tracker on ESP32☆48Updated last week
- Repository for the hardware parts of the OpenHT project☆54Updated 8 months ago
- M17 modem board for 9600-baud capable radios☆103Updated 2 months ago
- MCFW - Matoz Custom Firmware Based on Fagci OEFW https://github.com/fagci/uv-k5-firmware-fagci-mod and DualTachyon OEFW https://github.co…☆42Updated 11 months ago
- Programmable walkie-talkie.☆116Updated 6 months ago
- A FreeDV device based on the ESP32.☆101Updated 4 months ago
- ☆36Updated 10 months ago
- Quansheng UV-K5 EEPROM programmer☆25Updated last year
- Digital controlled radio frequency oscillator based on Raspberry Pi Pico (1 Hz to ~32.333 MHz band). RTTY, MFSK, freq sweep examples are …☆49Updated last year
- UV-K5 toolkit utility to read/write EEPROM and flashing firmware for Quansheng UV-K5 and UV-R5 radios☆54Updated 5 months ago
- The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements th…☆97Updated last year
- Open firmware for all versions of the uSDX transceiver☆87Updated 9 months ago
- ☆22Updated last year
- WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.☆129Updated last year
- Just another Windows software app for the NanoVNA's☆40Updated last month
- 16.93MHz all mode TRCV using ESP32-S3☆26Updated 5 months ago
- A pocket sized FT8 Transceiver utilizing Teensy 3.6, Si4735 and Si5351 technology.☆57Updated 3 years ago
- ESP32APRS LoRa is a APRS on LoRa network In that is implemented for Espressif ESP32,ESP32-S3,ESP32C3 processor.☆38Updated 2 months ago
- Quansheng UV-K5 emulator☆21Updated last year
- All HF bands QRP CW/SSB transceiver☆62Updated 7 months ago
- ESP32 based APRS iGate / Tracker / Digipeater with built-in AFSK1200 Modem☆36Updated 6 months ago
- VU3CER's HF Balcony Antenna System. Freedom from HOA ;). Also a Window Antenna System (WAS)!☆40Updated 3 months ago