Alternatives and similar repositories for battery-management

Users that are interested in battery-management are comparing it to the libraries listed below

• NimaAgm / Battery-Simulation
  Soc Estimation Based on Unscented Kalman Filter
  ☆24Updated 4 years ago
• jogrady23 / kalman-filter-battery-soc
  A Kalman Filter that estimates the state of charge of 2 Li-ion cells
  ☆82Updated 6 years ago
• lehn85 / pmsm_calculation
  ☆14Updated 7 years ago
• ornothing / BMSTestTool
  This is a test application for NetZero battery management system.
  ☆14Updated 6 years ago
• att-ar / lithium_ion_ecm_fit
  LFP cell ECM parameterization using second order RC model.
  ☆14Updated 3 years ago
• ShreyasMaitreya / Battery-Management-System
  BMS capable of SOC/SOH determination, passive cell balancing, over voltage, over current and over temperature protection determination us…
  ☆17Updated 2 years ago
• FooFooDamon / pcan_cantact
  XCAN firmware for CANtact ( CANable ) or any other similar boards.
  ☆11Updated 2 years ago
• geshan99 / BMS-Project
  Battery Management System with battery balancer and Kalman Filter based SoC estimation for lithium iron battery pack
  ☆15Updated 3 years ago
• ThunderMat / Introduction-to-MCU-Programming-for-Power-Electronics-Control-Applications
  This repository contains the MATLAB/Simulink source code to reproduce the experiments presented in the book: "Introduction to Microcontro…
  ☆101Updated 2 years ago
• pascal220 / PMSM_Control
  A Control Toolbox for a PM Synchronous Motor
  ☆26Updated 8 years ago
• feversky / Arduino-Xcp
  this library is going to implement a lightweight ASAM XCP protocol for real time measurement and calibration. A GUI client will also be d…
  ☆19Updated 4 years ago
• kanocarra / smart-battery-management-system
  Using machine learning to estimate the state of charge of lithium ion batteries for electric vehicles
  ☆56Updated 8 years ago
• MuellerDominik / theBMS
  Battery Management System with Active Cell Balancing
  ☆31Updated 6 years ago
• ucandevices / CFDC_embedded
  Embedded code and PCB for CAN FD to USB converter
  ☆15Updated last year
• NicolaGiardino / SoC_EKF_Linux
  BoS Thesis work on State of Charge Estimation of a Battery Pack using an Extended Kalman Filter, in a Real-Time Embedded Linux Environmen…
  ☆26Updated 4 years ago
• EnnoidMe / ENNOID-BMS-Tool
  The ENNOID-BMS Tool can be used to configure ENNOID-BMS.
  ☆39Updated 2 years ago
• eolatuyi / XCP-Learnings
  An evaluation of XCP protocol while integrating 3rd party sw - vector xcp stack, FreeRTOS on TIVA C Series board (XCP on CAN) and Raspber…
  ☆18Updated 5 years ago
• TUMFTM / Electric_Machine_Design
  ☆17Updated 4 years ago
• 596142041 / STM32-DSP_CAN_Boot
  ☆10Updated 8 years ago
• collin80 / GEVCU7
  7th generation GEVCU source code
  ☆26Updated 2 months ago
• nikkkkhil / Battery-Mangement-System-B.M.S-
  This is BMS for Li based batteries. Top level balancing of cells are used. Can be used in Vehicles and small scale applications.
  ☆15Updated 7 years ago
• EnnoidMe / ENNOID-BMS-Firmware
  Firmware for ENNOID-BMS
  ☆29Updated 2 years ago
• moonglow / doip_bridge
  Simple doIP to PCAN bridge
  ☆18Updated 4 years ago
• rubinsteina13 / C_INDUCTION_MOTOR_ESTIMATORS_LIB
  C-library with implementation of the Induction Motor rotor speed anf flux estimators (observers)
  ☆14Updated 5 years ago
• batterysim / nissan-leaf-data
  Battery cell data from a 2013 Nissan Leaf
  ☆24Updated 4 years ago
• chxb1987 / 280xxBootLoader
  BootLoader for F280xx TI DSP
  ☆11Updated 6 years ago
• FGP310592 / PMSMControlDemo
  Great repository to learn PMSM control and modelling. It provides the basic tools to generate control calibrations based on the motor par…
  ☆36Updated last year
• sz-CHEN / ZCANBus
  A common interface for PeakCAN and KvaserCAN
  ☆14Updated 6 years ago
• matejx / stm32f1-CAN-bootloader
  STM32F1 CAN bootloader
  ☆17Updated 5 years ago
• SummerFalls / pcan_cantact
  PCAN firmware for CANtact ( CANable ) or any other similar boards.
  ☆29Updated last year