Alternatives and similar repositories for WristMorse

Users that are interested in WristMorse are comparing it to the libraries listed below

• tmiw / ezDV
  A FreeDV device based on the ESP32.
  ☆105Updated last year
• IgrikXD / WSPR-beacon
  A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and au…
  ☆96Updated last week
• afiskon / hbr-mk2
  All HF bands QRP CW/SSB transceiver
  ☆69Updated last year
• Rotron / Pocket-FT8
  A pocket sized FT8 Transceiver utilizing Teensy 3.6, Si4735 and Si5351 technology.
  ☆62Updated 4 years ago
• G6EJD / ESP32-Morse-Decoder
  Using an ESP32 and OLED with a basic microphone to decode Morse Code live to the display
  ☆60Updated 3 years ago
• mobilinkd / NucleoTNC
  The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements th…
  ☆104Updated 2 years ago
• bhall66 / morse-tutor
  ☆61Updated last year
• RPiks / pico-WSPR-tx
  WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.
  ☆148Updated last year
• ESPboy-edu / ESPboy_WalkieTalkie
  ESPboy_WalkieTalkie software for UHF/VHF SA868 or SA818 modules
  ☆35Updated 2 years ago
• ManoDaSilva / ESP32-Pocsag-Pager
  Proof-of-concept Pager using a TTGO dev board. Will be merged with the "Waffle" project someday.
  ☆24Updated 2 years ago
• lu7did / PixiePi
  Ham radio transceiver QRPp based on Raspberry Pi
  ☆44Updated 5 years ago
• k5jae / LILYGO-T-TWR-Plus-case
  3D model and case for the LILYGO T-TWR Plus (https://www.lilygo.cc/products/t-twr-plus)
  ☆22Updated 2 years ago
• ok1hra / Parameterizable-3D-print-Antenna-rotator-in-OpenScad
  ☆28Updated 2 years ago
• mobilinkd / uv-k6-digital-mod
  UV-K6 Mods for Digital Modulation
  ☆63Updated last year
• armel / M5HamRadio
  M5HamRadio Firmwares
  ☆146Updated 8 months ago
• RPiks / pico-hf-oscillator
  Digital controlled radio frequency oscillator based on Raspberry Pi Pico (1 Hz to ~32.333 MHz band). RTTY, MFSK, freq sweep examples are …
  ☆72Updated last year
• AD0MZ / All-Band-Adjustable-Dipole
  Motorized 10-80 Meter Adjustable Dipole
  ☆26Updated last year
• WB2CBA / POCKET-TUNER-V1
  ☆33Updated last year
• kholia / Easy-Digital-Beacons-v1
  A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super exte…
  ☆84Updated 2 years ago
• profdc9 / RFBitBanger
  A QRP digital transceiver created from readily available parts for off-the-grid maintenance
  ☆213Updated last year
• amedes / pico_tnc
  TNC for Raspberry Pi Pico
  ☆72Updated 3 months ago
• paulh002 / sdrberry
  Raspberry pi SDR tranceiver using lvgl gui
  ☆194Updated 3 weeks ago
• mfhepp / tinyswr
  A tiny SWR and RF power indicator for QRP transceivers
  ☆63Updated 3 years ago
• tjlab-jf3hzb / Digital_VFO_with_analog_dial_V2
  ☆33Updated last year
• Hamlabs / ArcticTracker-ESP32
  Arctic Tracker on ESP32
  ☆56Updated 3 weeks ago
• aa1gd / pico_ft8_xcvr
  A standalone FT8 transceiver based on the Raspberry Pi Pico microcontroller by Godwin Duan, AA1GD.
  ☆33Updated last year
• EvanKrall / LibAPRS-esp32-i2s
  An APRS library for the Arduino IDE
  ☆36Updated 6 years ago
• kholia / pico_ft8_xcvr
  Fork of https://github.com/aa1gd/pico_ft8_xcvr project from AA1GD. Real-time FT8 decoding on Raspberry Pi Pico.
  ☆26Updated 3 years ago
• mobilinkd / tnc3-firmware
  Firmware for the Mobilinkd TNC3. STM32L433-based Bluetooth/LE KISS TNC.
  ☆40Updated last year
• tjlab-jf3hzb / All_mode_SDR
  16.93MHz all mode TRCV using ESP32-S3
  ☆30Updated 5 months ago