marmat / nikon-gp1-diyLinks
A low-cost GPS module for Nikon DSLRs
☆50Updated 6 years ago
Alternatives and similar repositories for nikon-gp1-diy
Users that are interested in nikon-gp1-diy are comparing it to the libraries listed below
Sorting:
- acro firmware for eachine H8 mini☆181Updated 5 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆58Updated 11 years ago
- DS203 quad oscilloscope firmware compatible with gcc☆294Updated 5 years ago
- Set the voltage of a Quick Charge 2.0 source via the Arduino.☆68Updated 8 years ago
- USB SPI programmer/debugger for CSR BlueCore bluetooth chips, based on FTDI USB to UART converter, for Linux and Windows☆588Updated 6 years ago
- Cheap and simple USB to HD44780 text LCD interface☆145Updated 8 years ago
- a7105 to cPPM for attiny85☆18Updated 7 years ago
- PTP, Camera-specific layers to work with Arduino USB Host Shield☆190Updated 14 years ago
- Source codes for DSO Shell (DSO150) from JYE Tech. They are not an exact copy of factory codes (e. g. product testing codes are not inclu…☆106Updated 8 years ago
- under construction☆93Updated 7 years ago
- A Qi wireless power receiver using attiny13☆57Updated 6 years ago
- https://twitter.com/_Jana_Marie/status/1270040286710968321☆34Updated 5 years ago
- Driver for a LED Matrix of 9 32x16 RGB HUB75 panels, using an STM32F4 Discovery board as low-level driver, and an Atheros AR9331 based Wi…☆117Updated 7 years ago
- Wildcat's firmware for the DS203/Quad pocket oscilloscope☆126Updated 3 years ago
- Cheerson CX10 rate mode firmware with integrated RF☆69Updated 7 years ago
- Implementation of new methods of communicating with Csr BlueCore chips using the BlueLab 4.1 framework, mainly for those without a functi…☆61Updated 6 years ago
- LabPowerQt is an application to control laboratory power supplies☆73Updated 3 years ago
- Driver for the ED060SC4 E-ink display☆217Updated 9 years ago
- MegaPirateNG☆120Updated 10 years ago
- Hard- and Firmware to control different EF and EF-S lenses☆125Updated 7 months ago
- Hardware and Software for a DIY solder station with WMRP tips☆65Updated 8 years ago
- Firmware images for Adafruit's Bluefruit LE Modules (Bluefruit LE Friend, etc.)☆121Updated 6 years ago
- Digital Camera Control support for USB Host Shield r.2.0☆171Updated 6 years ago
- Make old Sigma lenses work on newer Canon bodies.☆67Updated 5 years ago
- Qt assistant for Rigol DS1000 series scopes☆134Updated 5 years ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆154Updated 7 years ago
- I2S alsa device drivers for the popular MIPS ar9331 SOC (Carambola2, Arduino Yun...)☆27Updated 10 years ago
- Sniffer for Nordic NRF24L01+ modules with MySensors support☆159Updated 8 months ago
- Set the voltage of a Quick Charge 3.0 source via the Arduino.☆216Updated 3 years ago
- Schemetics and Code for a DIY weller soldering station☆157Updated 8 years ago