Alternatives and similar repositories for uBraids_SE:

Users that are interested in uBraids_SE are comparing it to the libraries listed below

• jakplugg / pique
  4hp version of mutable instruments peaks.
  ☆27Updated 5 years ago
• jakplugg / uGrids
  8hp eurorack module, μGrids is a version of Mutable instruments grids.
  ☆28Updated 4 years ago
• ramphands / Exits
  4hp DIY eurorack line and headphone output module based on the Nearness and AJH headphone amp modules
  ☆24Updated 2 years ago
• jakplugg / m-Brane
  6hp eurorack module, compact verion of Mutable Instruments Yarns.
  ☆32Updated 4 years ago
• jakplugg / Twiigs
  Twiigs 8hp dual Mutable Instruments Branches with sliders.
  ☆13Updated 3 years ago
• craigyjp / 16bit-MIDI-to-CV-polyphonic-converter
  6 note Polyphonic 16 bit MIDI to CV
  ☆22Updated 3 years ago
• jakplugg / uBurst
  eurorack module 8hp version of mutable instruments clouds
  ☆28Updated 6 years ago
• jakplugg / nRings
  8hp eurorack module version of mutable instruments rings
  ☆36Updated 4 years ago
• minisystem / Eurorack
  Eurorack modules
  ☆35Updated 10 years ago
• DunningtonAudio / 258D
  A dual oscillator project
  ☆27Updated 4 years ago
• THX2112 / 12VAC-Eurorack-Power-Supply
  A simple +12 -12 power supply for Eurorack using 12VAC adapters
  ☆15Updated 8 years ago
• gerb-ster / Vulcan-DCO
  A Eurorack DCO module based on the DCO core of the Roland Juno 106
  ☆23Updated 2 years ago
• Testbild-synth / HAGIWO-005-Eurorack-sequencer
  Through hole PCB version of the HAGIWO 005 Generative Sequencer Eurorack module.
  ☆25Updated 2 years ago
• buranelectrix / dredrum
  8-bit perc/drone generator for Eurorack systems
  ☆19Updated 9 years ago
• herculesxe5 / midimagic
  A versatile MIDI to CV module for eurorack
  ☆12Updated last month
• kraakenstuff / DoublePlusBass
  ☆12Updated 3 years ago
• spielhuus / elektrophon
  Modular analog electro acoustic noise machine.
  ☆30Updated 11 months ago
• spherical-sound-society / vortex-generator
  ☆20Updated 4 years ago
• Testbild-synth / Hagiwo_043_envelope_follower
  PCB converion of the HAGIWO envelope follower module.
  ☆15Updated 3 years ago
• dozencrows / eurorack
  ☆9Updated 4 years ago
• joranvg / test-3
  Test 3 Eurorack V/mA Meter
  ☆35Updated 7 years ago
• dhaillant / uc_divider
  Arduino based Clock Divider
  ☆18Updated 2 months ago
• TOILmodular / EurorackWaveFolder
  A slim (width 25mm) Wave Folder Eurorack module, based on the design from YUSYNTH.
  ☆12Updated 5 months ago
• JMHanson4 / Miasma_1.03_Revised
  ☆17Updated 4 years ago
• TOILmodular / Braids
  A Mutable Instruments Braids clone with the use of the STM32F103 Blue Pill Board.
  ☆22Updated last year
• PoloAudiovisual / Quatro
  QUATRO is a quad VCA and mixer based on Veils, by Mutable Instruments. Original design by Émilie Gillet - CC BY-SA 3.0. Through-hole remi…
  ☆20Updated 3 years ago
• TOILmodular / EurorackOTAVCF
  OTA VC Filter Module in Eurorack Format
  ☆13Updated 2 years ago
• Quinienl / NanoGris
  Arduino Nano version of Mutable Instruments Grids
  ☆39Updated 2 years ago
• TOILmodular / EurorackWavetableVCO
  Eurorack Wavetable VCO based on ElectricDruid VCDO
  ☆16Updated 6 months ago
• johannesstrueber / dots
  DOTS eurorack module pcb schematics and code ATMega328 based
  ☆19Updated 4 months ago