Alternatives and similar repositories for PrintSpider_Arduino

Users that are interested in PrintSpider_Arduino are comparing it to the libraries listed below

• Spritetm / printercart_simple
  Driver for HP 63/302/123/803 printer cartridges
  ☆91Updated 3 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆181Updated 4 years ago
• adgaudio / dlp_printer
  Complete designs for a completely custom built Laser-SLA 3D printer. My own Mechanical Designs, Firmware, and Software.
  ☆31Updated 10 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆74Updated 5 years ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆120Updated last week
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆23Updated 8 years ago
• SourceRabbit / RabbitGRBL
  Professional grade, 100% GRBL compatible motion control firmware for the ESP32
  ☆70Updated last week
• NicholasCLewis / InkShield
  An Open Source Inkjet Shield for Arduino
  ☆236Updated 14 years ago
• makerbase-mks / MKS-DLC
  MKS DLC support grbl firmware, can use Laser mode and CNC mode,support connect MKS TFT24/32/35 and TFT_CNC firmware support lasering and …
  ☆107Updated 4 years ago
• ryannining / karyacontroller
  4 axis CNC, 3D, Laser Controller
  ☆65Updated last year
• opengalvo / OPAL
  Minimalistic FW for Processing GCode to Galvanometer signals
  ☆102Updated last year
• makerbase-mks / MKS-SERVO42A
  Makerbase MKS SERVO42A NEMA17 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for Gen_L SGen_L
  ☆60Updated 4 years ago
• simon-jouet / ESP32Controller
  ESP32-based 3D printer controller
  ☆132Updated 4 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆80Updated 5 years ago
• LeandroLoiacono / 2L-Robot-Arm-Marlin
  ☆29Updated 4 years ago
• bdring / 4_Axis_SPI_CNC
  4 Axis CNC Controller for Grbl_ESP32
  ☆69Updated 5 years ago
• mossbot-MG / mini-one-pocket-3D-printer-firmware
  World's smallest 3D printer
  ☆83Updated 6 years ago
• uStepper / uStepperS
  ☆53Updated 2 years ago
• gvJaime / Sunrise
  3D Printable DLP 3D printer
  ☆48Updated 7 years ago
• MrAlvin / RAMPS_1.7
  An Arduino Shield for 3D printers
  ☆41Updated 6 years ago
• grblHAL / STM32F1xx
  grblHAL driver for ST STM32F1xx (Redpill, Bluepill)
  ☆64Updated this week
• gcobos / grblesp
  GRBL ported to ESP8266, using up to 8 axis. No arduino involved
  ☆60Updated 8 months ago
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆86Updated 3 years ago
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 6 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 8 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆64Updated 6 months ago
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆161Updated last month
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆203Updated 2 years ago
• markniu / PandaZHU
  3D printer control board based on ESP32,support 8 Driver motors.
  ☆88Updated 5 months ago
• openpnp / openpnp-openbuilds
  An OpenPnP compatible SMT pick and place machine based on OpenBuilds linear motion components.
  ☆240Updated 8 years ago