Alternatives and similar repositories for ds212

Users that are interested in ds212 are comparing it to the libraries listed below

• rocketscream / TinyReflowController
  An all-in-one Arduino compatible reflow controller powered by ATtiny1634R
  ☆127Updated 3 years ago
• MarcelMG / DIY-Soldering-Station-Controller
  A soldering station controller compatible with Weller RT tips
  ☆43Updated 5 years ago
• atar-axis / tc1-u4
  Alternative FW for U4 (STC15 8051 uC) on TransistorTester TC1
  ☆33Updated last year
• ArduinoHannover / ZPB30A1_Firmware
  Open-Source firmware for the ZPB30A1 electronic load (WIP)
  ☆51Updated 7 years ago
• positron96 / cnc3018-offline-controller
  Open-source firmware for popular cnc3018 stm32-based offline controller
  ☆78Updated 11 months ago
• KaeptnBalu / Arduino_Spot_Welder_V4
  This is V4 of the Arduino Spot Welder. An Arduino based Spot Welder for battery welding
  ☆95Updated 5 months ago
• atc1441 / ATC_stc_solder_iron
  Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based
  ☆50Updated 2 years ago
• MotoMaxis / DS203-DSOQuad
  Wildcat's firmware for the DS203/Quad pocket oscilloscope
  ☆124Updated 3 years ago
• iworld4us / nextion-2.4
  Firmware for Nextion 2.4", 2.8", 3.2'', 4.3" (for Marlin Kimbra)
  ☆14Updated 4 years ago
• zapta / ble_stepper_motor_analyzer
  A low cost stepper motor analyzer that uses wireless BLE link to display the data in real time on a Windows/Mac/Linux PC.
  ☆54Updated 2 years ago
• kubi48 / TransistorTester-documentation
  Documentation about the TransistorTester
  ☆68Updated 2 years ago
• ChrisWag91 / rpi_level_shifter_hat
  Raspberry Pi Hat for bidirectional 3V3 to 5V Level Shifting
  ☆32Updated 4 years ago
• giacu92 / Arduino-Reflow-Oven-Controller
  This repo contains all the files of my Arduino Nano based Reflow Oven PID Controller for reflow smd soldering.
  ☆17Updated last year
• PowerCartel / PackProbe
  Arduino code to read Smart Battery data from laptop battery packs using SMBus/I2C
  ☆114Updated 10 years ago
• megasaturnv / HX-2S-JH20-JH10-reverse-engineered_aka-2S-10A-Balance-Li-ion-Protection-PCB
  Reverse engineered circuit board of the HX-2S-JH20 PCB . Aka 2S 10A w/Balance Li-ion BMS Protection Board.
  ☆38Updated 6 years ago
• positron96 / ESP32_CNC_Pendant
  A CNC Pendant on ESP32 board, with LCD, WiFi and SD card
  ☆78Updated 2 months ago
• Cohesion3D / Cohesion3D-ReMix
  ☆13Updated 9 years ago
• xinabox / xLoader
  Tool for Flashing ☒CC01 and ☒CR0x using ☒IP01
  ☆102Updated 2 years ago
• rin67630 / Drok-Juntek-on-steroids
  Extend the possibilities of cheap digital power supplies with a WiFi module
  ☆61Updated last year
• akshaybaweja / Smart-IC-Tester
  ☆121Updated 4 years ago
• felixstorm / Creality_Ender_3_ESP32_Board
  ☆59Updated 3 years ago
• KaeptnBalu / Arduino_Spot_Welder_V3
  ☆207Updated 6 months ago
• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• blurpy / transistor-tester
  Documentation of my changes to the AVR transistor tester
  ☆160Updated 2 years ago
• marcoreps / linuxcnc_leadshine_EL8
  LinuxCNC configuration with EtherCAT Servo Drives Leadshine EL8 and some Beckhoff IO Modules
  ☆37Updated last year
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆59Updated 10 months ago
• jbebel / Ultimate-Box-Maker
  Ultimate Box Maker
  ☆64Updated 5 years ago
• KaeptnBalu / Arduino_Spot_Welder_V2
  Arduino controlled Spot Welder for battery welding
  ☆78Updated 7 years ago
• MakingStuffChannel / DigitalCalipers
  Source code and other files for reading values from digital calipers. See the project page for complete write up at http://makingstuff.in…
  ☆38Updated 8 years ago
• prusa3d / MK3_Power_Panic
  ☆33Updated 6 years ago