kevinakasam / Tridender-Skirts

Related projects ⓘ

Alternatives and complementary repositories for Tridender-Skirts

• fbeauKmi / update_klipper_and_mcus
  A bash script to update klipper and mcus in one step
  ☆49Updated last week
• kevinakasam / BAT_MMU
  A two channel MMU which is made out of a Nema and Servo. Very cheap, small and simple.
  ☆29Updated 7 months ago
• KayosMaker / Sharkfin_Extruder
  ☆37Updated 10 months ago
• TheVoronModder / MiniFridge
  Fridge Door for v0's
  ☆67Updated last month
• RobertLorincz / Orbiter-Toolboards
  ☆34Updated 2 months ago
• ArmoredTurtle / AFC-Klipper-Add-On
  Automated Filament Changer Software
  ☆44Updated this week
• MakerBogans / dirtybird
  ☆75Updated last year
• beacon3d / docs
  Beacon Docs
  ☆30Updated 11 months ago
• jakub874 / Jakub3DPrinterMods
  ☆45Updated 3 weeks ago
• kevinakasam / Papilio-Belt-Extruder
  The Papilio is an extruder that uses GT2 Timing Belts instead of metal gears to push the filament.
  ☆72Updated 4 months ago
• Amekyras / tulip
  Tulip - a pin mod with front idler tensioners for the Voron v0.2
  ☆33Updated 2 weeks ago
• FYSETC / FYSETC-ERB
  This is dedicated controller board for VORON ERCF (EnragedRabbitProject)
  ☆44Updated 2 months ago
• FYSETC / Hotkey
  Add Hotkey to your voron skirt , up to 12 keys.
  ☆25Updated last year
• majarspeed / Voron-9mm-belt-mod
  ☆30Updated 2 years ago
• VSSHole / voron-2.4-350mm-Hex-Lighting
  ☆48Updated last year
• zruncho3d / vampire_bat
  a pinned extrusionless gantry with pin-in-tube belt clips
  ☆39Updated 7 months ago
• kieraneglin / Thumper-Blocks
  ☆32Updated 10 months ago
• Armchair-Heavy-Industries / Trailhead-XY-Joints
  Modified XY joints for the Voron 2.4 and Trident
  ☆41Updated last year
• pure100kim / ERCF_Filament_Cutting_MOD
  ERCF Filament Cutting Mod
  ☆77Updated last year
• christophmuellerorg / voron_0_pancake_board
  ☆43Updated 2 years ago
• 3DPrintingMods / VoronTrident-AluminumG
  Aluminum Gantry (6mm and 9mm belts) for Voron Trident
  ☆87Updated last month
• Travis90x / Klipper-configuration
  Enhance your Klipper
  ☆21Updated last week
• kevinakasam / SwitchThread
  A smol Switchwire
  ☆42Updated 4 months ago
• GiulianoM / PTC_Heater_Mount
  Mounting plate for a 110V 500W PTC Heater module. Fits on Voron 2.4 bed rails.
  ☆33Updated 4 months ago
• MapleLeafMakers / V0_Upper_Rear_Bowden_Inlet
  A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero.
  ☆36Updated 10 months ago
• majarspeed / Misc-Voron
  Small but useful mods
  ☆40Updated last year
• CorvidBuilds / Mantis-Xol
  Modification of the Mantis toolhead by Long/Mandryd for 4010 blowers and other miscellaneous adjustments
  ☆58Updated last year
• skuep / GBB15
  A gantry-mounted CAN stepper driver board for 15mm aluminum beams (mostly for PrintersForAnts printers). This is heavily work in progress…
  ☆40Updated 4 months ago
• MotorDynamicsLab / Nitehawk-SB
  A USB toolboard for the Voron Stealthburner Toolhead
  ☆51Updated 3 weeks ago