Alternatives and similar repositories for KassutronicsQuantizer

Users that are interested in KassutronicsQuantizer are comparing it to the libraries listed below

• THX2112 / Tombola_Euclidean_Sequencer
  Updated of Tombola's modular euclidean sequencer
  ☆11Updated 8 years ago
• xnotox / CEM3340
  CEM3340 VCO PCB
  ☆21Updated 8 years ago
• HomoElectromagneticus / Yocto_808
  Unofficial Firmware for a TR-808 Clone by E-Licktronic
  ☆12Updated 5 years ago
• TimMJN / Arduino-Clock-Divider
  Clock divider module based on Arduino Nano, compatible with Eurorack and Kosmo modular synthesizers.
  ☆37Updated last year
• THX2112 / 12VAC-Eurorack-Power-Supply
  A simple +12 -12 power supply for Eurorack using 12VAC adapters
  ☆16Updated 8 years ago
• minisystem / Eurorack
  Eurorack modules
  ☆36Updated 10 years ago
• TomWhitwell / TH-VCO1
  ☆32Updated 9 years ago
• hadesbox / eurorack-with-binaries
  Dont use this repo for other than understanding how to setup your dev enviroments to make MI variants.
  ☆33Updated 7 years ago
• jakplugg / T_u
  8hp version of the MXMXMX temps_utile module
  ☆41Updated 3 years ago
• Quinienl / NanoGris
  Arduino Nano version of Mutable Instruments Grids
  ☆39Updated 2 years ago
• craigyjp / 16bit-MIDI-to-CV-polyphonic-converter
  6 note Polyphonic 16 bit MIDI to CV
  ☆23Updated 3 years ago
• RootsElectronics / Ambika-SVF-Dual-Voice-Card
  Adaptation of the Mutable Instruments Ambika SVF Voice Card in 0603 SMD, with 2 Voices per voice card
  ☆14Updated 3 years ago
• cctvfm / cascadence
  Cascadence is a low-cost eurorack-compatible Arduino development platform
  ☆26Updated 5 years ago
• pichenettes / avril-firmware_tools
  Tools for conversion of firmware files to .mid and .syx files
  ☆19Updated 6 years ago
• pichenettes / module_tester
  Test signal generator for Eurorack module
  ☆56Updated 6 years ago
• russellmcc / dco
  design files for cost-conscious DCO module for eurorack format modular synthesizers
  ☆30Updated 7 years ago
• DunningtonAudio / 281D
  A quad function generator project
  ☆22Updated 4 years ago
• kraakenstuff / ADSR
  2HP ADSR module based on "Fastest Envelope in the West" by René Schmitz (https://www.schmitzbits.de/adsr.html)
  ☆34Updated 5 years ago
• Cs4System / Eurorack
  Blattwerk Eurorack modules. Designed by Lorenz Neumann
  ☆72Updated 3 months ago
• a1k0n / x0xb0x
  git re-pack of x0xb0x code from sourcefource CVS
  ☆11Updated 8 years ago
• barnabywalters / Schraeg
  An 8HP eurorack multimode filter module based on the Bastl Cinnamon
  ☆38Updated 3 years ago
• joyfulnoisesynth / JNTUB
  JoyfulNoise Tiny Utility Board
  ☆26Updated 4 years ago
• Len42 / Synth
  Eurorack synthesizer module designs
  ☆44Updated 7 months ago
• ramphands / Exits
  4hp DIY eurorack line and headphone output module based on the Nearness and AJH headphone amp modules
  ☆25Updated 3 years ago
• TimMJN / Polymorph-VCO
  ☆12Updated 5 months ago
• BleepSound / ms20-vcf-double
  MS20-VCF clone based on BartonSynth version.
  ☆20Updated 8 months ago
• ramphands / LinearPowerBoard
  Board to take the input of two 15v SMPS PSUs and output a precise, regulated +/-12v
  ☆11Updated 5 years ago
• spielhuus / elektrophon
  Modular analog electro acoustic noise machine.
  ☆31Updated last year
• tomarus / diymetro
  DIY Metropolis Inspired Sequencer
  ☆25Updated 5 years ago
• TheSlowGrowth / VCOTuner
  A JUCE based multi-platform tuner for VCOs, VCFs and other analog gear.
  ☆66Updated 3 years ago