k3a / MicronovaPelletStoveControllerLinks
My code and stuff to use when controlling Micronova Pellet Stove Controllers. Stufa a pellet Idro Aria telecomando.
☆10Updated 6 years ago
Alternatives and similar repositories for MicronovaPelletStoveController
Users that are interested in MicronovaPelletStoveController are comparing it to the libraries listed below
Sorting:
- Half Duplex serial communication with ESP8266 and Micronova Stove controller☆11Updated 5 years ago
- Micronova based pellet stove ESPhome component☆17Updated 3 months ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆111Updated 3 years ago
- Send data from dht and soil hygrometer by 433Mhz RF with a power consumption of 5uA☆23Updated 8 years ago
- Software for the ESP8266 that sends P1 smart meter data to Domoticz (with CRC checking)☆82Updated 6 years ago
- RFLink for ESP, with MQTT client☆162Updated 3 months ago
- This repo contains documentation and code to interface with pellet stoves based on Micronova controllers☆24Updated last year
- Arduino library and hardware shield to send and receive data from Opentherm devices☆177Updated 2 years ago
- RFLink for ESP, with MQTT client☆74Updated 2 years ago
- Plugin ideas, concepts, user contributed, etc☆17Updated 5 years ago
- esp8266, serial bus to mqtt for Paradox alarm systems☆82Updated 3 years ago
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 2 years ago
- Homie based bridge between MQTT and RFlink module☆22Updated 5 years ago
- Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE☆38Updated 7 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆130Updated 4 years ago
- Library to simulate multiple Somfy remote controls.☆32Updated 4 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆258Updated last year
- Freeing the Silvercrest (Lidl/Tuya) Smart Home Gateway from the cloud.☆34Updated 4 years ago
- Node-red interactive thermostat☆15Updated 6 years ago
- ☆123Updated 2 years ago
- Device to measure energy and temperature☆80Updated 6 years ago
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆32Updated 6 years ago
- Some Tasmota firmware extensions☆58Updated 3 weeks ago
- A node-red PID loop controller node intended for the control of real world processes☆27Updated last year
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121☆146Updated 2 weeks ago
- My personal Workspace for Mysensors HW☆35Updated 5 years ago
- Plugin ideas, concepts, user contributed, etc☆192Updated last year
- ESPiLight - pilight 433.92 MHz protocols library for Arduino☆119Updated 2 years ago
- MQTT Client that can talk to cheap BLE tags (iTag)☆38Updated 8 years ago
- Allows you to easily control via MQTT any Micronova equiped pellet stove. (MCZ, Extraflame, Laminox, and many others brands!)☆82Updated 4 months ago