jorgecrce / IOT-RoverLinks
End of degree project
☆12Updated 9 years ago
Alternatives and similar repositories for IOT-Rover
Users that are interested in IOT-Rover are comparing it to the libraries listed below
Sorting:
- Open source robot for maze solving + line following☆11Updated 8 years ago
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆113Updated 5 years ago
- ☆40Updated 7 years ago
- An open-source and fully hackable biped robot.☆162Updated 9 years ago
- Arduino libraries for the Pololu Zumo Shield and Zumo robot kit for Arduino. (deprecated; replaced by https://github.com/pololu/zumo-shie…☆104Updated 7 years ago
- Air Hockey Robot Project☆194Updated 11 years ago
- aGuegu's arduino libraries collection☆85Updated 4 years ago
- STL for your 3D-Printer or Print Sevice☆130Updated 2 years ago
- Segway-like robot implemented on ESP8266☆121Updated 4 years ago
- Arduino uArm Metal Library (uArm Metal only)☆85Updated 7 years ago
- ☆73Updated 10 years ago
- A 3D printed raspberry pi ROS robot☆24Updated 10 years ago
- (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.☆34Updated 8 years ago
- "Follow your curiosity, Open your mind": OpenCuriosity is an open source, exomars rover (1:5 scale) with arduino as main controller, base…☆70Updated 11 years ago
- ChibiOS/RT 3.0.3 for Arduino AVR, Due, and Teensy 3.x☆111Updated 6 years ago
- The GoPiGo Robot for Raspberry Pi☆340Updated 6 years ago
- Based on the miniKame, modifications to the body of the robot to allow more space, included a ultrasonic sensor. ESP8266 based quadruped …☆29Updated 9 years ago
- A dual solid state relay for switching mains AC power☆21Updated 7 years ago
- Arduino library for Pololu LSM303 boards☆146Updated 3 years ago
- Library code for AM2315 sensors☆32Updated 2 years ago
- API and examples for using ZeroBorg☆13Updated 9 years ago
- Watney is a low-cost 3D-printable FPV rover☆415Updated 2 years ago
- New and improved version of our Balancing Robot B-ROBOT☆86Updated 8 years ago
- Barometric pressure, temperature, humidity and light sensing weather shield for Arduino.☆70Updated 2 years ago
- HMC5883L on Arduino with auto calibration capability☆38Updated 11 years ago
- Monster Moto Shield available from SparkFun Electronics.☆30Updated 5 years ago
- Particle parts for computer-aided design (CAD)☆86Updated 7 months ago
- Eddie the Balance Bot☆63Updated 9 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆83Updated 8 years ago
- Laser cut files for MeArm☆189Updated 2 years ago