Alternatives and similar repositories for cm4-carriers:

Users that are interested in cm4-carriers are comparing it to the libraries listed below

• harlab / CM4Ext_Nano
  Smallest, yet feature rich baseboard for Raspberry Pi Compute Module 4
  ☆158Updated 3 years ago
• ShawnHymel / rpi-cm4-base-carrier
  ☆122Updated 3 years ago
• ShawnHymel / rpi-cm4-carrier-template
  ☆188Updated last year
• timonsku / Minimal-RPi-CM-4-Carrier
  A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.
  ☆124Updated 4 years ago
• dronecz / Minimal_carrier_board_for_CM4
  This is simple carrier board for your CM4
  ☆72Updated 2 years ago
• olvint / CM4-NAS-MiniPCIE
  Raspberry Pi CM4 based NAS solution board
  ☆49Updated 4 years ago
• Diodes-Delight / Piunora-Hardware
  Design files and schematic for Piunora
  ☆50Updated last year
• mfolejewski / PicoBerry
  PicoBerry - small CM4 carrier board with full 40-pin GPIO header
  ☆57Updated 2 years ago
• harlab / CM4_LCD_LT070ME05000
  Raspberry Pi CM4 bindings for JDI LT070ME05000 1200x1920 IPS display
  ☆74Updated 3 years ago
• Kedarius / RPi-CM4-Kicad
  Schematic symbols and footprint for Raspberry Pi Compute Module 4 for KiCad
  ☆48Updated 3 years ago
• renetec-io / cm4-panel-jdi-lt070me05000
  ☆47Updated 3 years ago
• merocle / mincab
  small carrier board for Raspberry Pi CM4
  ☆151Updated 2 years ago
• v3l0c1r4pt0r / ucm4
  Raspberry Pi Compute Module 4 micro carrier board
  ☆38Updated 3 years ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆102Updated 2 years ago
• groupgets / kimchi-micro
  An open hardware embedded SBC for the NXP i.MX8M Mini application processor
  ☆123Updated 10 months ago
• ploopyco / pnp-feeder
  An automated feeder for pick and place machines.
  ☆155Updated 5 years ago
• solderparty / rp2xxx_stamp_footprints
  ☆73Updated 3 months ago
• solderparty / flexypin
  ☆104Updated last year
• CRImier / NGFF
  M.2 NGFF接口标准
  ☆23Updated 2 years ago
• usb-c / STUSB4500
  Autonomous USB-C PD controller for Power Sink applications (from Vbus=5V to 20V)
  ☆113Updated 3 years ago
• radxa / radxa-cm-projects
  ☆56Updated 8 months ago
• notro / pico-usb-io-board
  Raspberry Pi Pico USB I/O Board
  ☆76Updated 2 years ago
• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆51Updated 3 weeks ago
• Jana-Marie / CH330_Hardware
  CH330 breakout board
  ☆26Updated 2 years ago
• will127534 / CM4-Nvme-NAS
  A simple board for Raspberry Pi Compute Module 4 plus 4x NVMe SSD using ASM1184e
  ☆96Updated last year
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆53Updated 5 months ago
• holysnippet / pico_eth
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆30Updated last year
• will127534 / Coral-USB3-M2-Module
  Opensource Google Coral Module on M.2 2242 Card with USB 3 connection to Host
  ☆45Updated 9 months ago
• ltomov / 4-port-usb-hub
  4 port USB hub on a 2 layer board
  ☆25Updated 8 years ago
• photonfirmware / photon
  Open-Source firmware for pick and place feeders
  ☆55Updated 2 months ago