Alternatives and similar repositories for Air_Hockey_Robot_EVO

Users that are interested in Air_Hockey_Robot_EVO are comparing it to the libraries listed below

• Neuromancer2701 / BLDC_ros_controller
  ☆46Updated 7 years ago
• idlehandsdev / thePIDDYBOT
  PIDDYBOT is an Open Source Balancing Robot with the aim of teaching PID control.
  ☆43Updated 8 years ago
• Xevel / NXV11
  Hacking of the Neato XV-11 lidar
  ☆85Updated 5 years ago
• alvaroferran / OmniBoard
  Controller board for wheeled robots, based on the ESP8266 with three DC motors drivers, one-cell LiPo battery charger and Wifi connectivi…
  ☆15Updated 9 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• JRodrigoTech / xLIDAR
  Affordable and open-source LIDAR based on three VL53L0X ranging sensor.
  ☆68Updated 7 years ago
• IRNAS / UniversalUnipolarStepperController
  Universal controller for Unipolar stepper motors with encoders and end switches
  ☆12Updated 9 years ago
• pointhi / HighPower-Mechaduino
  Mechaduino derivative which drives up to 10A, drawn using KiCad
  ☆30Updated 6 years ago
• Counterfeiter / Q-LearningRobot
  This is a four-legged robot that learns to walk with Q-Learning and an ANN.
  ☆49Updated 8 years ago
• mjs513 / MPU6050-Motion-Detection
  Experimental sketch with Arduino and Python to determine whether the MPU6050 or the MPU9150 motion detection capability can be used relia…
  ☆36Updated 12 years ago
• TKJElectronics / Balanduino
  Git repository for the Balanduino balancing robot
  ☆135Updated 3 years ago
• reprappro / melzi
  Melzi Ardentissimo
  ☆54Updated 12 years ago
• ArcBotics / Servotor32
  Servotor32 - Open-Source, Low-Cost USB 32 Servo Controller
  ☆39Updated 9 years ago
• avikde / koduino
  Arduino code for STM32 microcontrollers
  ☆61Updated 7 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 5 years ago
• NordicPlayground / nrf52-quadcopter
  ☆62Updated 9 years ago
• bitboxelectronics / R2C2_Firmware
  R2C2 -- electronics for RepRap 3D printers (and others), CNC and other machines.
  ☆36Updated 5 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• OLIMEX / eduArdu
  Open Source Hardware Educational board based on Arduino Leonardo
  ☆23Updated 5 years ago
• jonnycowboy / YARRM
  Yet Another Robot aRM - a human-safe, open HW robotic arm with 5/7 DOF. Laser-cut steel and 3D Printed Part Construction
  ☆13Updated 9 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• gtoonstra / bldc-sim
  A simulator written in python with some basic diagramming functions for BLDC motor control analysis
  ☆47Updated 10 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆56Updated 5 years ago
• r3n33 / EddieBalance
  Eddie the Balance Bot
  ☆63Updated 8 years ago
• seamatech / arduino-bldc
  The brushless DC motor driver by arduino uno, suport sensored and sensorless BLDC motor
  ☆39Updated 3 years ago
• mikedotalmond / arduino-pulseInWithoutDelay
  A couple of libraries to emulate Arduino::pulseIn functionality without pausing code execution, using hardware interrupts.
  ☆12Updated 12 years ago
• msolters / arduino-at86rf233
  Simple Arduino driver for the AT86RF233 802.15.4 radio module, ported to C++ from RIOT-OS
  ☆11Updated 8 years ago
• Anilm3 / ADXL345-Accelerometer
  ADXL345 Arduino Library
  ☆36Updated 12 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• vedderb / bldc-logger
  A file and video-overlay logger for my BLDC motor controller
  ☆52Updated 9 years ago