Alternatives and similar repositories for Rover-Mission-Control

Users that are interested in Rover-Mission-Control are comparing it to the libraries listed below

• jakkra / RoverController
  LoRa/WiFi remote controller for driving my rover
  ☆126Updated 2 years ago
• XRobots / ROSremote
  ☆34Updated 3 years ago
• mjbots / pi3hat
  ☆42Updated 3 months ago
• roaldlemmens / morph
  MORPH : Modular Open Robotics Platform for Hackers
  ☆45Updated 6 years ago
• mjbots / hoverbot
  Simple balancing hoverboard robot
  ☆43Updated 3 weeks ago
• XRobots / Navigation-Unit
  ☆39Updated 4 years ago
• XRobots / SonicRobot
  ☆29Updated 2 years ago
• JeanetteMueller / OpenPerseverance
  This is a large Project about building your own Perseverance Mars Rover. 3D printed and remote controlled.
  ☆33Updated 9 months ago
• aaedmusa / OpenQDD-V1
  Open source 3D printed Robotic Actuator
  ☆75Updated last year
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆81Updated last year
• XRobots / BarcodeSynth
  ☆9Updated 4 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆80Updated last year
• AustinOwens / robodog
  Robotic quadruped project.
  ☆40Updated last year
• rosmod / rosmct
  Development of an openmct system for telemetry of ros systems
  ☆22Updated 2 years ago
• rosblox / pca9685_ros2_control
  ☆18Updated 2 weeks ago
• dlickindorf / moteus_canFD_serial
  A python script for controlling the moteus r4.3 using the canFD adapter
  ☆24Updated 3 years ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆74Updated last year
• Roboost-Robotics / firmware
  Modular micro-ROS motor control on ESP32 PlatformIO. Roboost Module.
  ☆26Updated 11 months ago
• makerspet / makerspet_loki
  Maker's Pet Loki - a 200mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform
  ☆46Updated 4 months ago
• esa-prl / ExoMy_Software
  Check out https://github.com/0xD0M1M0/ExoMy_Software for latest updates
  ☆26Updated 2 years ago
• owennewo / cybergear_adventures
  A set of arduino projects where I explore cybergear actuator using opensource codes
  ☆18Updated last year
• open-dynamic-robot-initiative / master-board
  Hardware and Firmware of the Solo Quadruped Master Board
  ☆124Updated 2 weeks ago
• camrbuss / diff-drive-esp32-uros
  Differential Driving Robot with ESP32 and ODrive running micro-ROS
  ☆13Updated 4 years ago
• mjbots / power_dist
  ☆13Updated 4 months ago
• mathias31415 / diy_robotics
  Gripper, PCBs and ROS2 software for Six-Axis Robot Arm WE-R2.4 from LoboCNC
  ☆25Updated 11 months ago
• bbokser / sprydrive
  SpryDrive is an affordable actuator based on the quasi-direct drive (QDD) scheme. It is composed of a brushless outrunner motor, a low-co…
  ☆39Updated 4 years ago
• mangdangroboticsclub / MiniPupperDocs
  ☆23Updated last week
• cholan2100 / ceasar
  ☆18Updated 4 years ago
• squirtifier / DIY---1D-Wannabe-Cubli-Reaction-Wheel
  ☆35Updated 4 years ago
• camrbuss / ros2_odrive_can
  ☆14Updated 3 years ago