Alternatives and similar repositories for TesSense

Users that are interested in TesSense are comparing it to the libraries listed below

• jasonacox / pypowerwall
  Python API for Tesla Powerwall and Solar Power Data
  ☆158Updated this week
• wido / smarttwc
  Smart (Tesla) charging with a Tesla Wall Connector (and some Python code)
  ☆24Updated 6 years ago
• firstof9 / openevse
  OpenEVSE Integration for Home Assistant
  ☆75Updated last week
• tango2590 / Hughes-Power-Watchdog
  Information on integrating the Hughes Power Watchdog autoformer series into HomeAssistant using ESPHome.
  ☆30Updated 10 months ago
• ngardiner / TWCManager
  Control power delivered by a Tesla Wall Charger using two wires screwed into its RS-485 terminals.
  ☆138Updated last week
• smurry / pool_controller
  PH and ORP monitor/control for ESP32
  ☆35Updated 4 years ago
• fkhera / powerwallCloud
  ☆30Updated 3 years ago
• jrutski / home_assistant_envoy_d7_fw
  Update for D7 based firmware on Envoy gateways
  ☆44Updated 2 years ago
• dewgenenny / rtl_433_discoverandsubmit
  This is a simple python CLI tool to review detected devices by RTL_433 via MQTT, then give the user the option to submit chosen devices t…
  ☆18Updated 4 months ago
• denverquane / MMM-Teslamate
  Magic Mirror Module for the Teslamate utility
  ☆56Updated 10 months ago
• briis / hass-weatherflow2mqtt
  WeatherFlow to MQTT for Home Assistant. Use UDP to get local weather data in to Home Assistant using MQTT Discovery
  ☆129Updated 4 months ago
• gcormier / esphome-pressure
  esphome board with a differential pressure sensor, supporting a variety of power sources
  ☆63Updated last month
• seanauff / metermon
  Dockerized rtlamr wrapper that outputs formatted JSON messages over mqtt
  ☆75Updated last month
• themonomers / tesla
  Utility tools leveraging the unofficial Tesla API's.
  ☆27Updated last month
• joncar / ha-fpa
  Home Assistant integration to control Baby Brezza's Formula Pro Advanced WiFi.
  ☆16Updated 2 months ago
• lmatula / ha_chint_pm
  homeassistant Chint power meter integration
  ☆23Updated 2 months ago
• motion-ai / motion-ai
  Configuration builder for HomeAssistant motion add-on
  ☆60Updated last year
• JuiceRescue / juicepassproxy
  Proxy UDP requests to/from Juicebox EV chargers to MQTT discoverable by Home Assistant
  ☆97Updated 2 months ago
• jrester / tesla_powerwall
  Python API for Tesla Powerwall
  ☆75Updated 3 months ago
• cribskip / esp8266_spa
  Control for a Balboa BP2100G0 spa controller using the esp8266
  ☆51Updated 3 years ago
• gazoodle / CenturyVSPump
  ESPHome custom component to drive Century (and other) variable speed pump motors
  ☆28Updated last year
• mdegat01 / addon-amr2mqtt
  HA Addon which runs rtlamr to read IDM power meter data and send to MQTT broker
  ☆37Updated last month
• emporia-vue-local / emporia-vue2-reversing
  ☆55Updated last year
• Snipercaine / WLED-Presets
  ☆100Updated 5 months ago
• megakid / ha_octopus_intelligent
  ☆97Updated last year
• zabuldon / teslajsonpy
  ☆59Updated 2 months ago
• spin877 / Bruciatore_BLE
  This project provides a Python script for interacting with the VEVOR diesel air heater, All-in-One model, via Bluetooth Low Energy (BLE).…
  ☆22Updated 4 months ago
• spbrogan / sensor.mopeka_pro_check
  Home Assistant custom component to support Mopeka Pro Check Tank Level Sensors
  ☆22Updated 2 years ago
• rubillos / RV-Bridge
  Homekit to RV-C bridge - Allows control of RV lights, fans, and thermostats via HomeKit.
  ☆75Updated 9 months ago
• AshMartian / HappyLeaf
  Read ELM327 from Nissan Leaf, modern customizable interface.
  ☆23Updated 7 years ago