imliubo / MLX90640-With-STM32
MLX90640 is a fully calibrated 32x24 pixels thermal IR array sensor.
☆25Updated 5 years ago
Alternatives and similar repositories for MLX90640-With-STM32:
Users that are interested in MLX90640-With-STM32 are comparing it to the libraries listed below
- STM32 Driver MLX90640 IR Sensor☆13Updated 6 years ago
- USB-C 1-60V Current and Voltage Controlled Power Supply☆18Updated 3 years ago
- Baremetal LVGL demo on Lichee Nano☆20Updated 4 years ago
- ☆36Updated 3 months ago
- PlatformIO platform and framework for Artery AT32 MCU☆24Updated 4 months ago
- Samples project for H7PI，run on qspi flash☆12Updated 5 years ago
- OpenMV Camera Module☆8Updated 2 years ago
- L1 R1 S1: PuyaSemi 24MHz Cortex-M0 MCU (PY32F002A/PY32F003/PY32F030)☆24Updated 2 years ago
- STM32 oscilloscope project☆14Updated 7 years ago
- SFP module test board for Raspberry Pi Pico☆56Updated 8 months ago
- A voltage source imitating the behaviour of a battery☆11Updated 5 years ago
- ☆19Updated 5 years ago
- Live pictures from OV7670 camera on ILI9341 display☆8Updated 6 years ago
- Pio UART receiver with DMA buffer (optional) for the RP2040☆13Updated 8 months ago
- Load bitstream to AG1K series FPGA using CH552☆12Updated 3 years ago
- Programming STM32 chip using esp8266☆29Updated 7 years ago
- Seeed code for the Kendryte K210 SoC on Arduino☆51Updated 5 years ago
- The circuit board is an integrated ESP32S3 and FPGA (GW1NSR-LV4CQN48PC6/I5) control chip. With the power management AXP2101 can be used t…☆54Updated 11 months ago
- Allwinner V3s Documentation☆55Updated 4 years ago
- ESP32-S2Beta is the test version of ESP32-S2. Please move to https://github.com/xiongyumail/esp32-s2-hmi.git. This project will not be ma…☆15Updated 5 years ago
- Command-line access to F1C100s GPIO☆24Updated 5 years ago
- STM32F429 + LCD + OV2640 + DMA DoubleBuffer☆14Updated 8 years ago
- STM32H7 Arduino form factor and software compatible board☆30Updated 3 years ago
- grbl for stm32 with nucleo stepper drivers☆36Updated 8 years ago
- A DIY Buck-Boost Power Supply for Laboratory works and personal use, based on LM5175 and ESP32.☆18Updated 4 years ago
- An example to show how to use dual CDC VCP USB interfaces.☆9Updated 4 years ago
- An open-source DAPLink Arduino Library supports Keil MDK, IAR Embedded Workbench, OpenOCD, and other commonly used IDE.☆35Updated 3 months ago
- Driving MIPI-DSI LCD using SSD2828☆8Updated 2 years ago
- A low cost FPGA/CPLD dev-board based on AG1280Q48.☆64Updated 2 years ago
- KiCad PCB project of Logic Analyzer☆39Updated 4 years ago