Alternatives and similar repositories for cadcam:

Users that are interested in cadcam are comparing it to the libraries listed below

• grotius-cnc / hal-core
  cnc and robot realtime controller. runs on a hal kernel module.
  ☆47Updated 2 years ago
• grotius-cnc / hal_trajectory
  Trajectory example
  ☆13Updated 3 years ago
• Serge45 / GCodeViz
  Open source G-code visualization tool
  ☆29Updated 6 years ago
• grotius-cnc / cam
  cam contour offset application. Input format dxf.
  ☆28Updated last year
• mythagel / cxxcam
  c++ cnc cam library
  ☆12Updated 8 years ago
• grotius-cnc / skynet_robot_control_rtos_ethercat
  Realtime 6-axis robot controller, based on Qt C++ & OpenCascade & KDL kinematics & HAL
  ☆94Updated 3 years ago
• TanayGahlot / ToolpathGenerator
  Automating Toolpath Planing and Generation for 3-Axis CNC
  ☆33Updated 6 years ago
• QGCoder / qgcoder
  An interactive G-code editing GUI.
  ☆19Updated 2 years ago
• danheeks / dxfconv
  This will be a command line program, reading a dxf file and saving a converted dxf file, with splines converted to biarcs.
  ☆12Updated 4 years ago
• Yaskawa-Global / SmartPendantSDK
  Software Development Kit (SDK) for Smart Pendant Extensions
  ☆16Updated this week
• grotius-cnc / qt_c_linuxcnc_interface_gui
  Linuxcnc interface gui based on halcommands and emc-nml messages, can read and visualise gcode
  ☆14Updated 4 years ago
• DjangoReinhard / kutecam
  a linux cam solution to create gcode from cad-model
  ☆16Updated 2 years ago
• DjangoReinhard / FalconView
  GUI control center for linuxcnc controlled machines
  ☆13Updated 2 years ago
• cnc-club / linuxcnc
  LinuxCNC S-curve
  ☆16Updated 12 years ago
• CalvinHsu1223 / LinuxCNC-EtherCAT-HAL-Driver
  LinuxCNC HAL EtherCAT Driver and example files for Panasoniic A5B series servo motors.
  ☆18Updated 9 years ago
• grblHAL / Simulator
  grblHAL drivers for simulation (Linux and Windows)
  ☆30Updated this week
• romixlab / cnc-vision
  Laser cutter autofocus, scanning and AOI module
  ☆14Updated 5 years ago
• eduard-x / cnc-qt
  GUI for CNC controller
  ☆34Updated 5 years ago
• ivanseidel / 3DLiveView-ABB
  Application using QT and native OpenGL, with a three based rendering engine to show a 3D ABB robot in sync with an arduino
  ☆20Updated 8 years ago
• zcutech / NodeTiler
  A node editor base on Qt & C++
  ☆9Updated 3 years ago
• brendanwong / g-code-generator
  Cross-platform G-Code extrusion command generator for well-plates and petri dishes
  ☆19Updated 4 years ago
• vladkrylov / STLViewer
  Simple STL model viewer in Qt
  ☆15Updated 7 years ago
• mikowiec / rhioCAD
  CAD, based on OpenCascade. parametric, parametric 3D modeler. Fork of NaroCAD.
  ☆63Updated 4 years ago
• koppi / mk
  LinuxCNC / Machinekit and EtherCAT notes.
  ☆59Updated 2 years ago
• grotius-cnc / s-curve-motion-planning
  constant jerk trajectory generator
  ☆42Updated 3 years ago
• 2782694792 / arduinoArmSystem
  基于 Qt 的机械臂操作系统 —— Arduino、四轴桌面电动机械臂、Qt 开发上位机、USB 串口通信
  ☆11Updated 2 years ago
• luhuadong / Arm_Robot_Sys
  A Robotic Arm Controller System with Qt
  ☆12Updated 9 months ago
• mythagel / nc_tools
  A collection of composable CNC/CAM GCode tools
  ☆20Updated 2 years ago
• PuddingPengChen / G-codeViewer
  This is a gcodeViewer ,which render gcode and stl file.
  ☆10Updated 9 years ago
• machinekit / EMCApplication
  Machinekit Featured Application for Enhanced Motion Controller from LinuxCNC
  ☆14Updated 3 years ago