Alternatives and similar repositories for grbl-builds

Users that are interested in grbl-builds are comparing it to the libraries listed below

• bobc / maple-asp
  Arduino Support Package For Maple
  ☆18Updated 10 years ago
• chamnit / preGrbl
  A g-code preprocessor for grbl. Checks and validates g-code compatibility, converts g-code into a more grbl-friendly format, and provides…
  ☆37Updated 11 years ago
• LaosLaser / Firmware
  Embedded software (firmware) for the laser system and components, including configuration files
  ☆27Updated last year
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• lowvoltage / Transistor-Tester
  ☆16Updated 13 years ago
• reprap / electronics
  RepRap Electronics
  ☆25Updated 14 years ago
• arduino / Arduino-stk500v2-bootloader
  STk500v2 bootloader for AVR 2560 and otherchips
  ☆47Updated 2 years ago
• cody82 / grblgui
  GUI for grbl.
  ☆51Updated 8 years ago
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 8 years ago
• reprappro / melzi
  Melzi Ardentissimo
  ☆54Updated 12 years ago
• 3Dartists / AlligatorBoard
  Alligator Board - 3D Printer Controller
  ☆21Updated 10 years ago
• nickw89509 / LaserInk
  Branch of Grbl 0.9G provides planned spindle control for lasers
  ☆10Updated 9 years ago
• freakyattic / Firmware-LaserCutter-Marlin
  Marlin-based Laser Cutter/Engraver firmware for RepRap Hardware ( Marlin 1.0.0 )
  ☆29Updated 9 years ago
• PeeJay / MotionBoard
  FirePick Delta/Ramps compatible motion controller running Smoothie
  ☆10Updated 4 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 8 years ago
• sparkfun / SparkFun_MicroView_Arduino_Library
  An Arduino library for the MicroView - a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics
  ☆21Updated 4 months ago
• estechnical / reflowOvenController
  ESTechnical Reflow Oven Controller source code and instructions
  ☆47Updated 10 years ago
• rocketscream / Reflow-Oven-Controller
  Arduino compatible reflow oven controller
  ☆136Updated 12 years ago
• grbl / grbl-sim
  Compiles Grbl into an executable for your computer.
  ☆95Updated 3 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago
• andysworkshop / awreflow
  Andy's Workshop Reflow Oven Controller
  ☆33Updated 7 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆64Updated 8 years ago
• villamany / 3dpBurner-sender
  A GCODE sender for the 3dpBurner laser cutter/engraver (GRBL based)
  ☆36Updated 7 years ago
• mariolukas / openexposer
  Open Exposer - Hardware, Slicer, Host, Firmware
  ☆67Updated 9 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆27Updated 7 years ago
• Neuromancer2701 / BLDC_ros_controller
  ☆46Updated 7 years ago
• langwadt / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆33Updated 4 years ago
• MakerChetan / 3D-Printing-ESP8266
  ☆43Updated 8 years ago
• SUNsung / HScope_PCB
  ☆26Updated 6 years ago
• Protoneer / Raspberry-Pi-CNC
  Web interface for controlling a GRBL via a Raspberry Pi
  ☆90Updated 9 years ago