Alternatives and similar repositories for PrntrBoard

Users that are interested in PrntrBoard are comparing it to the libraries listed below

• ghent360 / PrntrBoardV2
  32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.
  ☆43Updated 3 years ago
• terjeio / CNC_Breakout_Nucleo64
  CNC breakout for STM324F411 and ST32F446 development boards
  ☆21Updated 2 years ago
• jarekkt / step2mach
  Plugin for Mach3 and Nucleo-F429ZI board
  ☆17Updated 5 years ago
• pvico / grbl32
  CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux
  ☆67Updated 3 years ago
• grblHAL / STM32F4xx
  grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
  ☆122Updated this week
• grblHAL / STM32F1xx
  grblHAL driver for ST STM32F1xx (Redpill, Bluepill)
  ☆60Updated this week
• Aus3D / PicoPrint
  An STM32F4-based 3D printer control board, designed to be fast, quiet, and compact.
  ☆22Updated 6 years ago
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 6 years ago
• ryannining / karyacontroller
  4 axis CNC, 3D, Laser Controller
  ☆62Updated 10 months ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆22Updated 3 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆34Updated 3 years ago
• Alfrederson / cncstm32
  CNC Base for Blue Pill
  ☆17Updated 6 years ago
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆82Updated 3 years ago
• SupaCoder / 0816-Lumen-SMT-Feeder-Remix
  0816 SMT Automatic Feeder modified to work with the OpuloPNP. Custom firmware written for an arduino nano with a servo sheild can run 12 …
  ☆15Updated 3 years ago
• technosar / GRBL_STM32
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight ST…
  ☆31Updated 4 years ago
• hasenbanck / heteromycin
  A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
  ☆39Updated 5 years ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆20Updated 8 years ago
• terjeio / GRBL_MPG_DRO_BoosterPack
  Tiva C BoosterPack for GRBL MPG/DRO
  ☆47Updated 6 months ago
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆120Updated 3 weeks ago
• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆299Updated last year
• langwadt / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆33Updated 4 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆73Updated 5 years ago
• mstrens / grbl_controller_stm32
  Grbl controller running on stm32F103
  ☆37Updated 6 years ago
• puzrin / dispenser
  SMT solder paste and flux dispenser
  ☆38Updated 4 years ago
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆55Updated this week
• makerbase-mks / MKS-SERVO42A
  Makerbase MKS SERVO42A NEMA17 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for Gen_L SGen_L
  ☆57Updated 3 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆176Updated 3 years ago
• Nikolay-Kha / PCBConverter
  Tool for generating gcode for CNC machines from PCB gerber files.
  ☆61Updated 7 years ago
• drandrewthomas / ESP32_GRBL_CNC_Wireless_Pendant
  A wireless GRBL CNC pendant project based on the ESP32 micro-controller
  ☆54Updated 4 years ago
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆154Updated last year