Alternatives and similar repositories for BACCAble

Users that are interested in BACCAble are comparing it to the libraries listed below

• ludwig-v / arduino-psa-nac_rcc_cirocco
  PSA/Stellantis (Peugeot, Citroen, DS, Opel) NAC / RCC / CIROCCO Configuration softwares - Telecoding / Calibration
  ☆100Updated 4 months ago
• ludwig-v / arduino-psa-diag
  Arduino sketch to send UDS / KWP diagnostic frames over CAN-BUS to PSA/Stellantis cars (Peugeot, Citroen, DS, Opel)
  ☆196Updated 7 months ago
• dixtone / GiuliaAndStelvioDPFMonitor
  Simple project to monitor DPF regeneration status and other
  ☆29Updated 10 months ago
• danardi78 / Alfaromeo-Giulia-Stelvio-PIDs
  Alfaromeo Giulia-Stelvio PIDs and CarScanner export
  ☆15Updated 6 months ago
• dragouf / PSA-Arduino-NAC-RCC
  PSA NAC / RCC Arduino Diagbox Configuration software
  ☆41Updated 4 years ago
• cedricp / ecutweaker
  ☆74Updated 3 weeks ago
• gmenounos / kw1281test
  VW KW1281 Protocol Test Tool
  ☆213Updated last month
• laurynas / volvo_crankshaft
  Volvo V50 RTI Crankshaft project
  ☆62Updated 4 years ago
• vtl / volvo-cem-cracker
  Volvo central electronic module pin cracker via OBD for P1, P2 and P3 platforms
  ☆162Updated this week
• smartgauges / canbox
  Firmware for canbus boxes
  ☆111Updated 5 months ago
• TrentSeed / BMW_E46_Android_RPi_IBUS_Controller
  "Appify" your E46 BMW with a Raspberry Pi and your smartphone! Nexus 7 in dash, connected to Raspberry Pi (via Bluetooth), which is conne…
  ☆93Updated 2 years ago
• dontwaste / Volvo-RTI-Crankshaft-Canbus-Melbus
  I'm not a programmer/coder and this is my first project, so if anyone can help with editing the codes so I could use less hardware, that …
  ☆19Updated 2 years ago
• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆67Updated 6 months ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆159Updated 5 months ago
• JejuSoul / OBD-PIDs-for-HKMC-EVs
  Setting up Torque Pro to show OBD data on Hyundai / Kia Electric Vehicles
  ☆259Updated 4 years ago
• lprot / MIB-Tools
  ☆33Updated last year
• spot2000 / Volkswagen-MEB-EV-CAN-parameters
  ☆37Updated last year
• olegel / rtiMonitor
  Volvo RTI monitor as rear view camera monitor
  ☆16Updated 5 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆66Updated 7 years ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆66Updated last year
• v-ivanyshyn / mqb-steering-wheel-adapter
  MQB steering wheel adapter to retrofit into PQ46 platform (VW Passat b6/b7, CC)
  ☆56Updated 3 years ago
• terrafirma2021 / Yamaha-DataLogger
  ESP32 s3 Yamaha Datalogger
  ☆23Updated last year
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆95Updated 2 years ago
• jakka351 / OpenJ2534
  Open (and Closed) Source J2534 Resources for Automotive Diagnostics, Reprogramming & Tuning
  ☆307Updated 5 months ago
• rnd-ash / openStar
  Opensource diagnostic software for Daimler vehicles, inspired by Xentry and DAS, written in Rust
  ☆70Updated 4 years ago
• collin80 / ESP32RET
  CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)
  ☆344Updated 11 months ago
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆105Updated 3 years ago
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆47Updated 2 years ago
• Barracuda09 / PyPSADiag
  An Python application for sending diagnostic frames over CAN-BUS to PSA/Stellantis based cars
  ☆66Updated last week
• MotorvateDIY / ESP32_RET_SD
  CAN Bus reverse engineering tool firmware for the ESP32
  ☆39Updated 11 months ago