Alternatives and similar repositories for FireStep:

Users that are interested in FireStep are comparing it to the libraries listed below

• PeeJay / MotionBoard
  FirePick Delta/Ramps compatible motion controller running Smoothie
  ☆10Updated 4 years ago
• firepick1 / firenodejs
  ☆12Updated 8 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆57Updated 5 years ago
• ultimachine / Archim
  The 32-bit next generation of RAMBo
  ☆24Updated 5 years ago
• LaosLaser / Firmware
  Embedded software (firmware) for the laser system and components, including configuration files
  ☆27Updated last year
• IRNAS / ToslinkCNC
  CNC machine control modules with Toslink optical cables
  ☆27Updated 8 years ago
• synthetos / Motate
  A high-performance multi-architecture bare-metal embedded framework that is easy to learn and easy to use.
  ☆49Updated last year
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 4 years ago
• cdsteinkuehler / bobc_hardware
  CRAMPS - A Cape version of the RAMPS-FD design for 3D printing
  ☆45Updated 5 years ago
• osresearch / servostep
  Closed loop servo control for stepper motors
  ☆10Updated 9 years ago
• bitcraze / crazyradio-electronics
  Datasheets and KiCad project files for the Crazyradio electronics design.
  ☆30Updated 9 years ago
• fluidfred / powerlolu
  High Power Pololu Board based on A4989 - can be connected to RAMPS Pololu port
  ☆30Updated 10 years ago
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 7 years ago
• firepick-delta / firepick-delta
  Design and Manufacturing Specifications for FirePick Delta
  ☆103Updated 8 years ago
• modmaker / BeBoPr
  3D printer controller software for BeagleBone with BeBoPr Cape. For information about the BeBoPr++ follow this link: https://github.com/m…
  ☆71Updated 9 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago
• xpix / XDisPlace
  XDisplace are a complete solution to mill, dispense solder paste and pixk and place components to a pcb in one process!
  ☆12Updated 7 years ago
• Zubax / opengrab_epm_v3
  OpenGrab Electropermanent Magnet
  ☆33Updated 2 years ago
• firepick1 / FirePick
  www.firepick.org GitHub
  ☆45Updated 9 years ago
• MacroFab / MF_Part_Style_Guide
  Part Style Guide for part footprints.
  ☆9Updated 8 years ago
• hzeller / rpt2paste
  Convert KiCAD rpt files to G-Code to dispense solder paste
  ☆24Updated 10 years ago
• EGG-electric-unicycle / firmware-gen2_boards
  ☆29Updated 7 years ago
• pointhi / HighPower-Mechaduino
  Mechaduino derivative which drives up to 10A, drawn using KiCad
  ☆29Updated 5 years ago
• Cohesion3D / Cohesion3D-ReMix
  ☆13Updated 8 years ago
• grodansparadis / vscp-firmware
  Firmware for the VSCP project
  ☆29Updated last month
• bqlabs / IntelliServo
  ☆23Updated 9 years ago
• Poofjunior / imu_noodle
  PCBs for a imu chain over i2c
  ☆27Updated 6 years ago
• richard-sim / openpnp-linear-rails
  An OpenPnP compatible SMT pick and place machine with linear rails based on Anthony Webb's build on hackaday.io.
  ☆13Updated 8 years ago
• OpenPanzerProject / Scout-ESC
  Dual motor serial controller - ATmega 328 MCU with VNH5019 motor drivers
  ☆16Updated 5 months ago