ermtl / Open-Source-Ventilator

Related projects: ⓘ

• RespiraWorks / Ventilator
  Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license. Repository track…
  ☆130Updated 4 months ago
• RuairiSpain / openVentilator
  Cheap, diy ventilator
  ☆26Updated 4 years ago
• oxycon / ProjectApollo
  Designs/docs/software/PCB for Project Apollo (open source oxygen concentrator)
  ☆37Updated 2 years ago
• Programmable-Air / PCB
  Electronics for Programmable-Air
  ☆40Updated 4 years ago
• mit-drl / e-vent
  MIT Project: A low cost emergency ventilator controller
  ☆39Updated 4 years ago
• RepRapLtd / Oxygen-concentrator
  Open source oxygen concentrator design
  ☆81Updated 2 years ago
• PubInv / ventmon-ventilator-inline-test-monitor
  Design of inline monitor/tester for pandemic ventilators and Overall Strategy for Deployment
  ☆23Updated 4 months ago
• groupgets / c12880ma
  ☆53Updated 7 years ago
• adafruit / Adafruit_CircuitPython_INA219
  circuit python driver for INA219 current sensor
  ☆25Updated 9 months ago
• sparkfun / Big_Easy_Driver
  The Big Easy Driver available from SparkFun Electronics
  ☆25Updated 5 years ago
• alex-williams-2150 / underwater-glider
  ☆35Updated this week
• adafruit / Adafruit_SensorLab
  Arduino library for scientific sensor readings/fusions/manipulations
  ☆32Updated 2 months ago
• pcb2gcode / pcb2gcodeGUI
  GUI for pcb2gcode
  ☆128Updated 3 years ago
• thomasdob / tdstatv3
  A USB-controlled potentiostat/galvanostat for thin-film battery characterization
  ☆18Updated 2 years ago
• fluidfred / powerlolu
  High Power Pololu Board based on A4989 - can be connected to RAMPS Pololu port
  ☆30Updated 9 years ago
• patchinc / heartypatch
  A single lead ECG heart-rate variability monitoring patch with ESP32
  ☆128Updated 5 years ago
• Protocentral / AFE4490_Oximeter
  This pulse oximetry shield from ProtoCentral uses the AFE4490 IC to enable your Arduino to measure heart rate as well as SpO2 values.
  ☆46Updated 3 years ago
• peterisza / mobilecg
  ☆63Updated 2 years ago
• avtehnik / gt2-gear-genaretor
  ☆34Updated last year
• PubInv / covid19-vent-list
  A list projects to make emergency ventilators in response to COVID-19, focusing on free-libre open source
  ☆172Updated last year
• alex3dbros / ICUVent
  A repository made for an opensource hardware and software for ICU Ventilator
  ☆42Updated 4 years ago
• JRodrigoTech / xLIDAR
  Affordable and open-source LIDAR based on three VL53L0X ranging sensor.
  ☆68Updated 6 years ago
• zumbik / Eagle-Libraries
  ☆93Updated 9 years ago
• Opentrons / ot2
  Open source hardware documentation for the OT-2 liquid handling robot
  ☆56Updated 3 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆22Updated 6 years ago
• GrumpyOldPizza / arduino-STM32L4
  ☆69Updated 5 years ago
• sparkfun / SunnyBuddy
  MPPT single-cell LiPo battery charger based on the LT3562
  ☆31Updated 5 years ago
• ivmech / ivport-v2
  Raspberry Pi Camera Module V2 Multiplexer
  ☆42Updated last year
• Denvi / FlatCAM
  https://bitbucket.org/jpcgt/flatcam
  ☆81Updated 5 years ago
• xboxhacker / OpenFeeder
  OpenSource feeder for DIY and OpenPNP community
  ☆31Updated 8 years ago