dpoulson / r2_controlLinks
Python code to control an R2D2 (or other astromech) from a Raspberry Pi over i2c
☆43Updated 8 months ago
Alternatives and similar repositories for r2_control
Users that are interested in r2_control are comparing it to the libraries listed below
Sorting:
- 3D Print CAD files from XRobots.co.uk/R6☆164Updated 10 years ago
- Arduino sketches for R2-D2 remote control with Xbox 360 Controller☆79Updated 11 months ago
- Reeltwo RSeries Astromech Firmware☆37Updated 10 months ago
- Sketch for the R2UppitySpinner PCB☆12Updated 3 years ago
- Flthy Holoprojectors with OLED support☆15Updated 6 years ago
- Parts for my V3 BB-8 as I make them☆55Updated 8 years ago
- Info, Hardware Files and Arduino Sketches for the RSeries Logic Engine.☆29Updated 10 months ago
- Watney is a low-cost 3D-printable FPV rover☆415Updated 2 years ago
- BB8 Version 2!☆70Updated 9 years ago
- Raspberry Pi Zero FPV Robot☆109Updated 7 years ago
- Code for a hexapod robot☆91Updated 6 years ago
- Capers II is a hexapod robot with three degrees of freedom per leg.☆56Updated 7 years ago
- Files and Basic Instructions for my Periscope Lifter☆19Updated 10 months ago
- Arduino Pro Micro sketch for Maxstang's PSIPro☆10Updated 5 years ago
- Antdroid robot ROS repository☆71Updated 9 years ago
- Sawppy the Rover: A Motorized Model of Mars Rover Curiosity and Perseverance for <$500 In Parts☆476Updated 4 months ago
- An open-source and fully hackable biped robot.☆162Updated 9 years ago
- Build your own robot like a Ninja 🐱👤 This is the first emotional modular EdTech robot that can walk and roll!☆367Updated last year
- Hexy the Open-Source, Low-Cost Hexapod☆121Updated 6 years ago
- Open Source Java Framework for Robotics and Creative Machine Control☆251Updated 2 months ago
- The Stupid fast Servo powered balance bot☆45Updated last year
- This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.☆232Updated 5 years ago
- Files for the XRobots BB8 project☆93Updated 10 years ago
- ☆201Updated 4 years ago
- All the things for RobotX☆130Updated 7 years ago
- miniDog V2 CAD and Code☆63Updated 5 years ago
- ☆112Updated 10 years ago
- Power management for portable Raspberry Pi projects☆230Updated 9 years ago
- My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…☆367Updated last year
- ☆151Updated last year