dotcypress / ula
μLA: Micro Logic Analyzer for RP2040
☆806Updated last month
Alternatives and similar repositories for ula:
Users that are interested in ula are comparing it to the libraries listed below
- Use a raspberry pi pico (rp2040) as a logic analyzer and oscilloscope with sigrok☆844Updated 5 months ago
- ☆835Updated last week
- virtual debug pod for RP2040 "Raspberry Pi Pico" with no added hardware☆390Updated 2 years ago
- Open source minimal stack for the ch32 line of WCH processors, including the ch32v003, a 10¢ 48 MHz RISC-V Microcontroller - as well as m…☆1,040Updated last week
- A simple USB sniffer based on Raspberry Pi RP2040☆575Updated 7 months ago
- CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10☆412Updated 3 months ago
- Yet Another Picoprobe☆133Updated last month
- CH32V003 RISC-V Pure Software USB Controller☆514Updated last month
- Bitbanged DVI on the RP2040 Microcontroller☆1,296Updated 5 months ago
- ☆317Updated last month
- An FTDI FT2232H-based multi-protocol tool for hardware hacking☆646Updated last week
- Low-cost LS/FS/HS USB sniffer with Wireshark interface☆904Updated 8 months ago
- ☆430Updated 7 months ago
- Read-only mirror of the official repo at git://sigrok.org/pulseview. Pull requests welcome. Please file bugreports at sigrok.org/bugzilla…☆502Updated 4 months ago
- JTAG probe firmware☆505Updated 2 months ago
- Raspberry Pico powered Xilinx Virtual Cable - Xilinx JTAG Cable! This is now quite fast, thanks to tom01h! We also support JTAG + serial …☆401Updated 3 months ago
- Kicad Library for ICs from WCH☆221Updated 11 months ago
- Read-only mirror of the official repo at git://sigrok.org/libsigrok. Pull requests welcome. Please file bugreports at sigrok.org/bugzilla…☆335Updated 3 months ago
- Free and open implementation of the CMSIS-DAP debugger firmware☆268Updated 8 months ago
- KiCAD RF tools: footprints wizard and round tracks, mask expander, via fencing☆695Updated 2 months ago
- USB host/device implementation using PIO of raspberry pi pico (RP2040).☆1,414Updated last month
- Convert your KiCAD board into a nicely looking 2D drawing suitable for pinout diagrams☆1,194Updated 8 months ago
- PlatformIO platform for CH32V RISC-V chips (CH32V003, CH32V103, CH32V20x, CH32V30x, CH32X035) and CH56x, CH57x, CH58x, CH59x☆260Updated 2 weeks ago
- Kiri is a visual tool designed for reviewing schematics and layouts of KiCad projects that are version-controlled with Git.☆532Updated last month
- An extremely affordable and user-friendly pocket-sized electronic lab that is easy to replicate☆168Updated last year
- ☆253Updated 3 years ago
- Automation tools for KiCAD☆1,589Updated this week
- UF2 bootloader based on TinyUSB for embedded devices such as ESP32S2, STM32F4 and iMX RT10xx☆346Updated last week
- Software CAN bus implementation for rp2040 micro-controllers☆703Updated 3 weeks ago
- ngscopeclient and other client applications for libscopehal.☆644Updated this week