Alternatives and similar repositories for StacKlipper:

Users that are interested in StacKlipper are comparing it to the libraries listed below

• ArmoredTurtle / TurtleNeck
  Simple toolhead buffer for AFC systems
  ☆44Updated last month
• JiMcNulty / FDC
  non-linear frame deformation calibration and compensation 2.0
  ☆76Updated last year
• henrikssn / TurboCAN
  This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also …
  ☆78Updated 3 years ago
• timmit99 / Klipper-Expander
  ☆43Updated 2 years ago
• pfn / EnragedRabbitOnRRF
  RepRapFirmware configuration and macros to drive the Enraged Rabbit Carrot Feeder
  ☆40Updated last year
• ArmoredTurtle / Filatector
  Compact, in-line filament detection sensor.
  ☆36Updated 2 months ago
• orobardet / klipper_nano_expander
  Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
  ☆30Updated last year
• ArmoredTurtle / TN-Pro
  TurtleNeck 2.0 - The smart toolhead buffer.
  ☆46Updated 2 months ago
• worksasintended / klipper_linear_movement_analysis
  ☆73Updated last year
• nhchiu / Steppy-Torque-Wrench
  A 3D printed torque wrench design inspired by the LDO mascot - Steppy
  ☆19Updated 2 years ago
• OpenAMSOrg / filament-buffer
  OpenAMS Filament Buffer
  ☆45Updated last month
• TypQxQ / KTC
  Klipper Toolchanger Code v.2
  ☆54Updated 3 months ago
• songcq / FilterRing
  Filter for 3d printers inspired by NeverMore
  ☆27Updated 2 years ago
• yzyyou / jenny-corexy-V1.2
  metallized structure inspire by vorondesign
  ☆25Updated 3 years ago
• VzBoT3D / Vz-HextrudORT
  Extruder based on MirageC HextrudORT
  ☆107Updated 2 months ago
• Evan10E / Voron-FFC-Toolhead-Board
  ☆19Updated 3 years ago
• RobertLorincz / Orbiter-Toolboards
  ☆46Updated 3 months ago
• v6cl / WinchRack
  Motor powered standalone spool rewinder for Annex Tradrack
  ☆42Updated 11 months ago
• Mellow-3D / Klipper-CAN-Toolboards
  ☆49Updated last year
• Exerqtor / Voron
  My Voron mods, scrips, macros & configs.
  ☆55Updated last month
• HelgeKeck / vcore-idex
  v-core idex config
  ☆3Updated 10 months ago
• tehmaze / PowerBRRR
  48V injection daughter board for Step Stick drivers
  ☆39Updated 2 years ago
• bigtreetech / MMB
  ☆68Updated last month
• Cartographer3D / cartographer-probe
  ☆50Updated 2 weeks ago
• skuep / GBB15
  A gantry-mounted CAN stepper driver board for 15mm aluminum beams (mostly for PrintersForAnts printers). This is heavily work in progress…
  ☆42Updated 8 months ago
• pure100kim / ERCF_Filament_Cutting_MOD
  ERCF Filament Cutting Mod
  ☆81Updated last year
• FYSETC / FYSETC_SB_CAN_TOOLHEAD
  StealthBurner toolhead CAN bus module for VORON
  ☆23Updated last year
• MakerBogans / roadkill
  ☆26Updated last year
• TypQxQ / kTAMV
  Klipper Tool Alignment (using) Machine Vision
  ☆85Updated 11 months ago
• K-Tett / Klipper-FastSQV
  A post-processing script and macro to accelerate the perimeter and infill print speed with Klipper
  ☆31Updated 2 years ago