Alternatives and similar repositories for litefeeder:

Users that are interested in litefeeder are comparing it to the libraries listed below

• SebG3D / TapePuller
  tape puller/remover for 0816 automatic feeder
  ☆21Updated 5 years ago
• ErichStyger / McuOpenPnP_Machine
  Repository for the McuOnEclipse OpenPnP machine
  ☆64Updated 3 years ago
• alexavr2 / alexfeeder
  Semi-automatic 3D printable feeder for custom SMT Pick and Place machine
  ☆47Updated 8 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆34Updated 2 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆23Updated 6 years ago
• reivax-boucoi / Electronic_Load
  DIY Electronic load for DCDC converter characterization
  ☆51Updated 4 years ago
• UnexpectedMaker / vacuum-stencil-box
  ☆29Updated 3 years ago
• markmaker / PushPullFeeder
  All 3d-Printed Tape&Reel Feeder
  ☆77Updated 3 months ago
• mgineer85 / sFeeder
  Parametric Feeder Design, load in OpenSCAD to make yours.
  ☆19Updated 10 months ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 4 years ago
• dronecz / ESP32-Reflow-Controller
  Reflow controller with ESP32 and TFT LCD on board.
  ☆68Updated last month
• SupaCoder / 0816-Lumen-SMT-Feeder-Remix
  0816 SMT Automatic Feeder modified to work with the OpuloPNP. Custom firmware written for an arduino nano with a servo sheild can run 12 …
  ☆13Updated 2 years ago
• Mortezix / pnpfeeder
  Pick and place 3d printable feeder
  ☆16Updated 8 years ago
• microsmt / Microsmt-PNP-hardware
  All documents about making microsmt pnpboard
  ☆53Updated last month
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆76Updated 4 years ago
• richardklingler / openpnp
  My pick and place machine controlled by the great OpenPNP software.
  ☆73Updated 3 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago
• LowPowerLab / CurrentRanger
  Precision auto-ranging current meter (ammeter)
  ☆99Updated last month
• CurlyTaleGamesLLC / MaxFeeder
  Arduino Mega shield for controlling part feeders for Open PNP
  ☆28Updated last month
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆19Updated 7 years ago
• foxis / ESPReflow
  ESP8266 reflow controller
  ☆35Updated 2 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago
• robin7331 / pixel-pump-mainboard
  ☆39Updated 2 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• kingoflolz / linear-actuator-hardware
  ☆60Updated 2 years ago
• geniekobayashi / juki_nozzle_changer
  OpenPnP project
  ☆17Updated 8 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆50Updated 2 years ago
• rocketscream / TinyReflowController
  An all-in-one Arduino compatible reflow controller powered by ATtiny1634R
  ☆124Updated 3 years ago
• halfmarble / hm-panelizer
  a simple PCB panelizer
  ☆127Updated last year