dgesswein / mfm
MFM emulator code
☆54Updated last month
Alternatives and similar repositories for mfm:
Users that are interested in mfm are comparing it to the libraries listed below
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆63Updated 6 years ago
- Device firmware for accessing a floppy drive at the raw flux level☆58Updated 2 months ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆46Updated 5 months ago
- ISA floppy disk controller card that supports up to 8 floppy drives☆65Updated last year
- Driver for 3COM 3C509B cards in 8-bit IBM PC/XT slots☆63Updated 3 years ago
- XT-IDE 8-Bit IDE Controller☆102Updated 3 months ago
- ISA 4Mb EMS expansion board☆30Updated 2 months ago
- Verilog code for C128 custom chips☆29Updated 10 months ago
- a 2022 replica of the classic TI/994a, using obtainable parts☆38Updated 4 months ago
- ☆20Updated 2 years ago
- pyAccess1581 creates d81 disk images from real floppy disks used with Commodore VC1581 disk drive☆17Updated 5 years ago
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆33Updated 2 years ago
- A voltage adapter PCB for 486 CPUs☆37Updated last year
- An FPGA-based disk controller card for the Apple II☆45Updated 6 years ago
- PCBs to plug various newer SMT parts into vintage DIP sockets. Generaly to use a newer PLCC, SOIC, or TSOP EEPROM or Flash part to replac…☆25Updated this week
- Open source clone of the Commodore 128 computer☆57Updated 3 years ago
- A small daughterboard adapter that replaces a 6502 processor (used in vintage 8-bit computers such as the VIC-20, Apple II and BBC Micro)…☆40Updated 3 years ago
- Drop-In replacement for Dallas DS12887 RTC module☆43Updated 3 years ago
- sd2iec from http://sd2iec.de/sd2iec.git☆37Updated 11 years ago
- Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors☆34Updated 4 years ago
- A low-profile SCSI adapter from male 50-pin to male DB-25☆23Updated 3 years ago
- SD card based ProFile replacement for IIe☆71Updated 3 years ago
- an UniFLEX compatible hardware/software project on Eurocards☆31Updated last month
- CPLD Replacement for A2000 Buster☆68Updated 11 months ago
- CL-GD5434-based ISA VGA card.☆28Updated 4 years ago
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated last year
- Convert USB mouse to Serial mouse using Pi Pico☆32Updated 6 months ago
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆29Updated 3 months ago
- This project aims at reading the ROM content out of a mask programmed MC6801 uP.☆20Updated 2 years ago
- A software-defined ISA card powered by a Raspberry Pi Pico☆43Updated last year