Alternatives and similar repositories for electronic_load:

Users that are interested in electronic_load are comparing it to the libraries listed below

• ArduinoHannover / ZPB30A1_Firmware
  Open-Source firmware for the ZPB30A1 electronic load (WIP)
  ☆49Updated 6 years ago
• wagiminator / ATtiny85-TinyLoad
  Electronic Dummy Load
  ☆46Updated 2 years ago
• ohararp / ReflowOven
  Repository for OSHW Reflow Oven Control
  ☆26Updated 10 years ago
• tom-biskupic / LabPSU
  Open Source Lab Power Supply
  ☆27Updated 2 years ago
• paltatech / half-bridge
  TO247 half bridge module for EVs
  ☆15Updated 6 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated last year
• PTDreamer / heatgun
  STM32 controller for cheap Chinese handle
  ☆19Updated 6 years ago
• reivax-boucoi / Electronic_Load
  DIY Electronic load for DCDC converter characterization
  ☆50Updated 4 years ago
• sfrwmaker / soldering_907_lcd
  The soldering controller for hakko 907 with lcd screen
  ☆28Updated 5 years ago
• roybaer / sduino_uno
  A development board with STM8S105K6 MCU in Arduino UNO form factor
  ☆17Updated 7 years ago
• dword1511 / stm32-freqmeter
  A frequency / Hertz meter based on STM32F103 MCUs.
  ☆48Updated 6 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• im-pro-at / ESP32_ReflowOvenController
  Reflow Oven Controller with EPS32 and Webapp
  ☆39Updated 5 years ago
• lucysrausch / jlcsmt-kicad-converter
  Converts kicad .csv BOM files to JLCSMT compatible BOM format.
  ☆51Updated 5 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago
• 0xPIT / Air858
  Simplified and optimized replacement controller for the low-cost W.E.P. 858D+ Hot Air Soldering Station
  ☆14Updated 8 years ago
• maugsburger / avr-component-tester
  ☆30Updated 9 years ago
• sbelectronics / pi-dcload
  dcload controlled by raspberry pi
  ☆11Updated 4 years ago
• fmeschia / esr-meter
  Arduino-based battery internal resistance meter
  ☆45Updated 8 years ago
• Jana-Marie / CH330_Hardware
  CH330 breakout board
  ☆26Updated 2 years ago
• Hoksmur / stm8_routines
  Routine and procedures for STM8 MCUs.
  ☆17Updated 10 months ago
• wagiminator / ATtiny13-TinyProbe
  Simple Logic Probe
  ☆40Updated 2 years ago
• unfrozen / stm8_libs
  Library collection for STM8, specifically stm8s103 and stm8s105.
  ☆44Updated 2 years ago
• TheHWcave / GPIB-to-USB
  GPIB-to-USB interface (Arduino Nano) and GPIB logger (Python)
  ☆21Updated 5 years ago
• baoshi / I2C-LED
  ☆23Updated 11 years ago
• LibreSolar / 5uh-dc-lisn
  5uH DC LISN (-10 dB attenuation)
  ☆16Updated 5 years ago
• eez-open / CF-DIC
  Current-fed dual inductor converter with wide input and output voltage range
  ☆19Updated 5 years ago
• openscopeproject / HP34401a-OLED-HW
  HP34401a DMM OLED display mod hardware
  ☆25Updated 5 years ago
• neu-rah / PCINT
  Yet another Arduino PCINT library
  ☆9Updated last year