desflynn / realtek-8192cu-concurrent-softAP
Some scripts to build and install the Realtek 8192cu driver via dkms, with concurrent mode enabled, allowing simultaneous AP and client mode. All necessary files including hostapd 2.4 with rtl871xdrv patches and config files for hostapd, dhcpd, /etc/network/interfaces are included.
☆38Updated 3 years ago
Alternatives and similar repositories for realtek-8192cu-concurrent-softAP:
Users that are interested in realtek-8192cu-concurrent-softAP are comparing it to the libraries listed below
- Hostapd driver for RTL8188{C|CU|CUS} wifi chips.☆176Updated 5 years ago
- hostapd for Realtek RTL8188☆335Updated 9 years ago
- Patches to compile OpenWrt Linux on Ralink RT5350-based routers☆70Updated 10 years ago
- Adafruit's hacking-friendly Raspberry Pi linux kernel☆131Updated 6 years ago
- Script for compiling, patching and packing hostapd from sources☆46Updated 7 years ago
- A Raspberry Pi / BCM2835 Software-based UART Linux device driver☆133Updated 2 years ago
- Linux kernel module driver for the ESP8266 chip for Raspberry Pi☆44Updated 8 years ago
- Port gmediarender-resurrect to OpenWrt.☆30Updated 11 years ago
- ESP8266 lwIP library with NAT, SLIP, ENC28j60 Ethernet, and routing support☆70Updated 4 years ago
- Onion Packages Feed for OpenWRT☆106Updated last week
- Supports BananaPi -M1 / M1Plus / M2☆24Updated 9 years ago
- ☆120Updated 2 years ago
- ESP8266 AT+ Command Set☆70Updated 10 years ago
- The objective of this project is to provide an SDK and root file system for the Raspberry Pi that is lightweight and takes full advantage…☆230Updated 2 years ago
- The uboot source code of OrangePi 2G-IOT☆13Updated 7 years ago
- Linux source for Allwinner/Boxchip F20 (sun3i), A10 (sun4i), A12/A13/A10S (sun5i) and A20 (sun7i) SoCs☆25Updated 7 years ago
- VoCore2 firmware drivers☆99Updated last week
- PL2303HX Userspace GPIO control tool☆35Updated 4 years ago
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago
- Contains mainline uboot and kernel3.4 source code, You can build your own H2 image using build scripts.☆42Updated 8 years ago
- ☆115Updated 7 years ago
- Uboot and openwrt firmwares of RT5350☆84Updated 11 years ago
- Build images using yocto for the orange-pi zero and pc SBCs☆41Updated 4 years ago
- ☆53Updated 6 years ago
- ☆20Updated 7 years ago
- Up to date hostapd with RTL8188 drivers☆51Updated 8 years ago
- Simple sniffer for inexpensive Espressif ESP8266 Wi-Fi SoCs☆56Updated 9 years ago
- openwrt CC with Domino/GL patches☆128Updated 6 years ago
- Development has moved to https://github.com/RPi-Distro/rpi-source☆289Updated 4 years ago
- Save Linux frambuffer (/dev/fb0) to a PNG image file.☆48Updated 4 years ago