darrylb123 / usbrelayLinks
Control usb relay - based on hidapi
☆350Updated 5 months ago
Alternatives and similar repositories for usbrelay
Users that are interested in usbrelay are comparing it to the libraries listed below
Sorting:
- Software for USB-connected relays with HID interface. See the WIKI for more info.☆269Updated 2 years ago
- ☆90Updated 2 years ago
- Control USB power on a port by port basis on some USB hubs.☆364Updated last month
- Grabserial - python-based serial dump and timing program - good for embedded Linux development☆211Updated 4 months ago
- Controlling different relay cards for home automation with a Linux software☆84Updated 2 years ago
- jpnevulator is a handy serial sniffer. You can use it to send data on a serial device too. You can read or write from/to one or more seri…☆123Updated 4 years ago
- v4l2 based solution to running Flir One from Linux☆104Updated 3 years ago
- rdserialtool - RDTech UM/DPS/RD series device interface tool☆99Updated 3 years ago
- Mirror of cc-tool from SourceForge☆165Updated last month
- ☆120Updated 3 years ago
- List USB devices and reset a USB device from the command line☆111Updated 2 years ago
- Dump the state of the BCM270x GPIOs☆122Updated 5 months ago
- Minimal IPv6 library for Ethernet controllers on Arduino☆64Updated 4 years ago
- A Raspberry Pi / BCM2835 Software-based UART Linux device driver☆133Updated 2 years ago
- Qualcomm Atheros Open Powerline Toolkit.☆404Updated 4 months ago
- Whsniff is a command line utility that interfaces TI CC2531 USB dongle with Wireshark for capturing and displaying IEEE 802.15.4 traffic …☆137Updated last year
- A Linux kernel driver for ch341 emulating the I2C bus☆75Updated 4 years ago
- "RFCOMM for BLE" a Serial UART over Bluetooth low energy (4+) bridge for Linux, Mac and Windows☆351Updated 11 months ago
- Python only library to scan and decode advertised BLE info. Uses asyncio. Can decode Ruuvi Tag. Can broadcast EddyStone packets.☆128Updated last year
- ☆144Updated 3 years ago
- A Linux kernel driver for ch341 emulating the I2C bus☆119Updated last year
- Control the power settings for a USB hub☆63Updated 2 years ago
- The objective of this project is to provide an SDK and root file system for the Raspberry Pi that is lightweight and takes full advantage…☆230Updated 3 years ago
- Buildroot based sample firmware for HiSilicon`s System-On-a-Chip ip cameras☆140Updated 4 years ago
- Gadget-tool - Linux command line tool for setting USB gadget using configFS☆162Updated 4 months ago
- Software-based serial port module for Raspberry Pi.☆176Updated last year
- A Linux kernel SPI-driver for the RFM12B and RFM69CW RF modules by HopeRF☆114Updated 3 years ago
- CLI utility for programming CP210x USB<->UART bridges☆111Updated 4 years ago
- Version that works for Stretch☆114Updated 7 years ago
- ☆153Updated 6 years ago