cutiepi-io / cutiepi-firmwareLinks
MCU firmware for CutiePi board
☆23Updated 2 years ago
Alternatives and similar repositories for cutiepi-firmware
Users that are interested in cutiepi-firmware are comparing it to the libraries listed below
Sorting:
- Drivers for the CutiePi tablet☆31Updated 4 years ago
- Enclosure design for CutiePi tablet☆33Updated 4 years ago
- SunLeaf is a WiFi based remote sensor module, interfaces with I2C and UART sensors, pushes directly to the cloud.☆22Updated 9 years ago
- My Open Source Hardware (OSHW) projects☆17Updated 4 years ago
- USB Sink based around the STUSB4500☆27Updated 5 years ago
- Discussion, files, spec, and more for a M.2 standard for makers☆34Updated 5 years ago
- ESP32-S2 development board with native USB-OTG, the hardware supports both USB host and USB device functionality, LiPo battery charger an…☆18Updated last year
- TMC2209 4 Acis Grbl_ESP32 Controller☆21Updated 4 years ago
- Repository of code for the micro robots for education project. Provides a ros interface for the small robots.☆16Updated 9 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆30Updated 6 years ago
- ☆13Updated 3 years ago
- Configurations of Olimex boards that can be loaded by the Arduino board manager.☆14Updated 2 years ago
- ESP32_CAM meets Etch-A-Sketch => Etch-a-Selfie☆12Updated 6 years ago
- Custom Raspberry Pi Compute Module (1/3) IO Board☆33Updated 8 years ago
- Tiniest USB-C LiPo charger☆37Updated 3 years ago
- Arduino / ESP-IDF library for mdash.net IoT service☆35Updated 10 months ago
- PCB files for the Adafruit FT232H Breakout☆39Updated 5 years ago
- Firmware for the One Inch Oscilloscope☆30Updated 7 years ago
- Collection of various PCB designs and Firmware for prototyping projects☆15Updated 3 years ago
- Raspberry Pi CM4 based NAS solution board☆50Updated 5 years ago
- ESP32-S2 IoT developement board with WiFi, USB programmer, RGB LED, LiPo charger, GPIOs☆17Updated 5 years ago
- Esp32-S2 dev board with 240x240 IPS display☆80Updated 4 years ago
- TinyUSB Core for Arduino☆21Updated 4 years ago
- ☆16Updated 7 years ago
- 3D printable - DIY microscope☆14Updated 7 years ago
- Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick☆16Updated 6 years ago
- PicoBerry - small CM4 carrier board with full 40-pin GPIO header☆64Updated 3 years ago
- Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd☆58Updated 4 years ago
- ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG☆51Updated last year
- An Open Source Thermal Imaging IR camera that you can build yourserlf☆59Updated 4 months ago