Alternatives and similar repositories for anduril2-diagrams

Users that are interested in anduril2-diagrams are comparing it to the libraries listed below

• ToyKeeper / anduril
  Anduril 2 Flashlight Firmware and FSM UI Toolkit
  ☆434Updated 6 months ago
• Spagett1 / pineflash
  A tool to flash ironos to the pinecil soldering iron and possibly other pine64 devices in the future
  ☆337Updated 11 months ago
• starryalley / Anduril2
  my Anduril2 fork that provides much more features
  ☆50Updated last year
• builder555 / PineSAM
  UI for Pinecil V2 - control it over BLE from your PC or your mobile.
  ☆265Updated last week
• labbots / NiimPrintX
  NiimPrintX is a Python library designed to seamlessly interface with NiimBot label printers via Bluetooth. This library supports a range …
  ☆379Updated last year
• yanshay / SpoolEase
  The smart 3d printing filament management system that brings NFC technology, inventory management, weight tracking, and automated configu…
  ☆369Updated 3 weeks ago
• mkong1 / anduril
  ☆34Updated 2 years ago
• alvarop / usb_c_cable_tester
  ☆787Updated last year
• pine64 / pine64_updater
  Application for updating PINE64 devices, such as Pinecil
  ☆187Updated 2 years ago
• mnott / bambumine
  My settings to have my Bambu Lab Printer run offline
  ☆54Updated 10 months ago
• georgslazdans / outline-app
  Outline recognition app
  ☆275Updated last month
• mwood77 / osww
  The Open Source Watch Winder - a modular, simple-to-build watch winder.
  ☆131Updated last year
• ide / usb-c-to-c-power-mod
  A flex PCB to retrofit a USB-C connector with 5.1k pull-down resistors to enable C-to-C power
  ☆341Updated 4 years ago
• petl / USB-C-cable-tester-C2C-caberQU
  Can my cable support USB 2.0/3.0/3.1/3.2, power delivery? Is a wire broken?
  ☆213Updated 2 years ago
• joric / pinecil
  Bluetooth client for Pinecil V2
  ☆106Updated last year
• mnh-jansson / m18-protocol
  ☆858Updated 2 months ago
• dirkhh / adsb-feeder-image
  Easy to use turn-key SD card image for a number of popular single board computers to run a complete ADS-B feeder
  ☆279Updated this week
• spuder / OpenSpool
  RFID for 3d printer filament
  ☆647Updated last month
• SasaKaranovic / OpenFanController
  Open-source open-hardware PC fan controller for everyone!
  ☆242Updated 9 months ago
• MallocArray / airgradient_esphome
  ESPHome definition for an AirGradient DIY device to send data to HomeAssistant and AirGradient servers
  ☆312Updated last month
• Bumblefuck / 25mm-olfa-blade-holder-knife
  3D print your own AvE plastic blade holder in brutalist metalshop modern
  ☆100Updated last year
• shaggyone / multiboard-parametric
  Parametric multiboard tile
  ☆54Updated last year
• fidoriel / BambUI
  Free and Open UI for Bambu Lab Printers Lan Mode
  ☆156Updated 2 months ago
• mfactory-osaka / ESPTimeCast
  Clock/Weather station with ESP8266/ESP32
  ☆1,005Updated this week
• domschl / RaspberryNtpServer
  Stratum-1 time server with Raspberry Pi and GPS
  ☆120Updated 2 months ago
• ajfriesen / ESPHome-AirGradient
  ESPHome config for AirGradient Air Quality Sensor
  ☆204Updated 8 months ago
• ChazLayyd / Bambu-Lab-Klipper-Conversion
  Running Klipper on a Bambu Lab machine by replacing it's internal electronics with readily available open-source hardware.
  ☆523Updated 8 months ago
• Surrey-Homeware / Aura
  Smart weather forecast device
  ☆124Updated 4 months ago
• ndevenish / gflabel
  Generate 3d-printable labels for gridfinity label systems
  ☆136Updated 11 months ago
• slynn1324 / BambuP1Streamer
  mjpeg stream access for Bambu P1 printers
  ☆136Updated 5 months ago