Alternatives and similar repositories for webrtc-intercom:

Users that are interested in webrtc-intercom are comparing it to the libraries listed below

• matiaspl / LinkPi-ENCx
  ☆65Updated last month
• MarcusWolschon / RasPi_stage_intercom
  The talkiepi project is for a truly headless mumble client for the Raspberry Pi, utilizing static config and GPIO for status LEDs and a b…
  ☆27Updated 6 years ago
• tommyjlong / app_rtsp_sip
  Asterisk Application - Two-way audio with your Camera using RTSP and SIP to an Asterisk Channel
  ☆24Updated 4 years ago
• reneklootwijk / mideahvac-dongle
  ☆56Updated 3 years ago
• bartbutenaers / node-red-contrib-onvif-nodes
  Node Red nodes for communicating with OnVif compliant IP devices
  ☆71Updated last year
• deckerego / tally_pi
  TallyPi allows you to build network controlled tally lights for live cameras, intended for control by OBS but extensible enough to use fo…
  ☆43Updated 2 years ago
• jeffmikels / ptz-server
  Control any PTZ camera that supports the VISCA Protocol either over serial or IP or both.
  ☆19Updated last year
• TECH7Fox / asterisk-hass-addons
  Asterisk add-on for Home Assistant
  ☆87Updated this week
• avwuff / esphome-wiegand
  Simple ESPHome Wiegand custom component
  ☆32Updated 3 years ago
• matiaspl / intercom
  A githubbed version of DIY production intercom system based on Mumble voice chat server and headless client running on Raspberry Pis.
  ☆61Updated last year
• jesserockz / wizmote-esphome
  ☆76Updated 6 months ago
• zoilomora / hikvision-to-mqtt
  Sends alarm events from Hikvision DVR to MQTT
  ☆22Updated 2 years ago
• misterhay / VISCA-IP-Controller-GUI
  A graphical program for controlling PTZ cameras using VISCA commands over a local network
  ☆20Updated 2 years ago
• bcanfield / mediamtx-connect
  ☆38Updated last week
• hobbyquaker / rpi2mqtt
  Connect RaspberryPi GPIOs and 1-Wire temperature sensors to MQTT
  ☆23Updated 7 years ago
• dirkx / SMPTE-EBU-TimecodeGenerator-ESP32
  ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.
  ☆52Updated 2 years ago
• vsimonaitis / ESP8266-MQTT-IR-Blaster
  ESP8266 Compatible IR Blaster that accepts MQTT and HTTP commands for use with services like Amazon Echo
  ☆32Updated 6 years ago
• dgaust / esphome_files
  ☆33Updated 4 months ago
• International-Anglican-Church / visca-joystick
  A simple python app for connecting a gaming controller to a VISCA over IP camera
  ☆24Updated last month
• andyboeh / esphome-dmx512
  An ESPHOME custom component to control DMX-512 devices via UART + RS485 module
  ☆49Updated 5 months ago
• jeremywillden / visca-stick
  USB Joystick control of VISCA-compatible PTZ video cameras
  ☆13Updated 6 months ago
• AutoPTZ / autoptz
  AI Tracking Solution for Any PTZ Cameras
  ☆66Updated last year
• wrodie / ha_behringer_mixer
  Home Assistant integration for Behringer Digital Mixers eg (X32)
  ☆23Updated this week
• cdgriffith / pi_streaming_setup
  Raspberry Pi camera / webcam streaming setup
  ☆66Updated last year
• CosmicMac / ESPresence
  Detect presence of Wifi devices and publish their mac/rssi to MQTT Server
  ☆28Updated 7 years ago
• guido-visser / vMix-M5Stick-Tally-Light
  A script to run on a M5Stick-C to use the device as a Tally Light for vMix
  ☆78Updated 3 years ago
• laluz742 / node-red-contrib-nspanel-lui
  A Node-RED backend implementation for the NSPanel Lovelace UI firmware.
  ☆14Updated last month
• Supergiovane / node-red-contrib-hikvision-ultimate
  A native set of node for Hikvision Cameras, Doorbells, Alarms, Radars etc.
  ☆55Updated 2 months ago
• gio-dot / Esphome-Wiegand-reader
  ☆27Updated 4 years ago
• ThomasMout / Arduino-vMix-tally
  A project to create tally lights for vMix using Arduino
  ☆40Updated 4 years ago