Alternatives and similar repositories for 3Dmodel:

Users that are interested in 3Dmodel are comparing it to the libraries listed below

• clockworkpi / launchergo
  launcher of GameShell in golang
  ☆31Updated 2 years ago
• deltabeard / cmio
  Custom Raspberry Pi Compute Module (1/3) IO Board
  ☆32Updated 7 years ago
• elect-gombe / quake-k210
  quake for k210
  ☆46Updated 5 years ago
• arturo182 / pmod_rgb_oled_0.95in
  ☆16Updated 4 years ago
• cutiepi-io / cutiepi-drivers
  Drivers for the CutiePi tablet
  ☆31Updated 3 years ago
• PocketSprite / UGUI
  µGUI - Open Source GUI module for embedded systems
  ☆23Updated 6 years ago
• InnovateAsterisk / Raspberry-Pi-Tablet
  A project around the development of a Raspberry Pi based tablet.
  ☆26Updated 4 years ago
• leeseungcheol / ODROID-GO
  ☆24Updated 4 years ago
• clockworkpi / Keypad
  GameShell's Keypad arduino code.
  ☆33Updated 4 years ago
• clockworkpi / Kernel
  CPI Linux Kernel
  ☆31Updated 2 years ago
• Dean-Chu / Retro-CM3
  ☆40Updated 5 years ago
• solderparty / bbq10kbd_i2c_sw
  ☆51Updated 3 years ago
• OtherCrashOverride / mmd-odroid-go
  ODROID-GO (ESP32) 3D graphics demo
  ☆14Updated 6 years ago
• solderparty / keyboard_featherwing_hw
  ☆27Updated 3 years ago
• mixtile / xskit
  xskit
  ☆15Updated 8 years ago
• GenericLab / WildOpenPCR
  Derivate of the OpenPCR Project
  ☆14Updated 7 years ago
• KittenBot / uf2-meowbit
  bootloader for meowbit based on https://github.com/mmoskal/uf2-stm32f
  ☆15Updated 5 years ago
• bbenchoff / Dumb-Badge
  A portable dumb terminal
  ☆45Updated 2 years ago
• wertyzp / WiringNP
  This is a GPIO access library for NanoPI. It is based on the WiringOP for Orange PI which is based on original WiringPi for Raspberry Pi.
  ☆25Updated 3 years ago
• penk / mini-P4-Cube
  Mini P4 Cube - a Raspberry Pi 4 computer in a 4" Cube
  ☆25Updated 4 years ago
• bitluni / ESP32SpaceShooter
  ☆31Updated 6 years ago
• FablabTaipei / FabDoc-RPi-client
  Pass time-lapse images through socketIO from Raspberry Pi Zero into browser.
  ☆8Updated 7 years ago
• arturo182 / pmod_bbq10_keyboard
  Moved to https://github.com/solderparty/pmod_bbq10_keyboard
  ☆25Updated 5 years ago
• roboard / 86Duino
  open-source x86 electronics prototyping platform
  ☆50Updated 3 years ago
• sipeed / Longan-DOC
  Longan RV32 Boards Document
  ☆47Updated 5 years ago
• 1o1-Oscilloscope / Firmware
  Firmware for the One Inch Oscilloscope
  ☆29Updated 6 years ago
• YuzukiHD / YuzukiRulerPro
  YuzukiRulerPro based on Allwinner D1-H RISC-V Processor
  ☆26Updated 2 years ago
• YuzukiHD / YuzukiRosetta
  Yuzuki Rosetta is a low-cost Linux development board based on the R328-S3. Dual-core A7, 128MB RAM, NAND Flash, WI-FI&BT. Raspberry Pi Ze…
  ☆25Updated last year
• adafruit / Adafruit-1.8-TFT-Shield-PCB
  Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
  ☆16Updated 5 years ago
• knivd / ELLO-2M
  ELLO 2M and ELLO 2M² (stacked PCB DIY computer)
  ☆73Updated 2 years ago