Alternatives and similar repositories for node-red-gfconnect:

Users that are interested in node-red-gfconnect are comparing it to the libraries listed below

• craftbeerpi / craftbeerpi4-ui
  ☆12Updated last year
• rmooreID / Home-Assistant-Appliance-Monitor
  Get alerts about the state of a pre-IoT appliance based on signal from a sensor. In this example I'm attaching an SW-420 vibration sensor…
  ☆80Updated 5 years ago
• bachya / ecowitt2mqtt
  Send data from Fine Offset weather stations (Ecowitt, Ambient Weather, Froggit, etc.) to MQTT!
  ☆238Updated this week
• kingpulsar / Grainfather-Bluetooth-Protocol
  Documents the commands sent via bluetooth to the Grainfather brewing system.
  ☆42Updated 4 years ago
• tango2590 / Hughes-Power-Watchdog
  Information on integrating the Hughes Power Watchdog autoformer series into HomeAssistant using ESPHome.
  ☆29Updated 6 months ago
• john-0 / gfx
  Grainfather signal extender - Connects to your Grainfather and starts an http server allowing you to control it from any device connected…
  ☆11Updated 5 years ago
• kbx81 / esphome-configs
  Configurations I use on my various ESPHome devices
  ☆24Updated last year
• hertzg / rtl_433_docker
  📡+🐋=💘 rtl_433 multiarch docker images.
  ☆190Updated 7 months ago
• thorrak / tiltbridge
  Tilt Hydrometer to WiFi Bridge
  ☆62Updated this week
• alsFC / esphome-iSpindel
  iSpindel for ESPHome
  ☆44Updated 3 years ago
• Achronite / mqtt-energenie-ener314rt
  MQTT interface for Energenie ENER314-RT add-on board for the Raspberry Pi, designed for use by Home Assistant.
  ☆13Updated last month
• rtlindne / RaspberryPints
  A digital signage version of the common chalkboard-based taplist. Based on the kegerface/kegerface git.
  ☆30Updated last year
• bellrichm / WeeWX-MQTTSubscribe
  A WeeWX service and driver that receives data from MQTT.
  ☆55Updated this week
• mannkind / ESPHomeRoombaComponent
  A barebones ESPHomeLib Roomba Component
  ☆57Updated 4 years ago
• fredrike / esphome-nodes
  ☆89Updated 2 years ago
• marthoc / GarHAge
  a Home-Automation-friendly ESP8266-based MQTT Garage Door Controller
  ☆171Updated 6 years ago
• mnpg / Reolink_api_documentations
  Reolink API official and unofficial documentations
  ☆33Updated 9 months ago
• owenb321 / eink_ambient_display
  ☆97Updated last year
• Krazy998 / mqtt-hisensetv
  Details to connect to Hisense Smart TV MQTT broker for home automation
  ☆127Updated 2 years ago
• billchurch / bhyve-mqtt
  MQTT Gateway to unofficial Orbit B-Hyve API
  ☆49Updated 7 months ago
• Scrin / ruuvi-go-gateway
  Software replica of the Ruuvi Gateway
  ☆22Updated last year
• M4dmartig4n / tuya-convert
  A collection of scripts to flash Tuya IoT devices to alternative firmwares
  ☆73Updated 5 years ago
• seb821 / espRFLinkMQTT
  ESP8266 gateway between RFLink and MQTT server
  ☆97Updated 2 years ago
• deepcoder / bluetooth-temperature-sensors
  Read Bluetooth Advertising Packets from BLE temperature sensors and publish data to MQTT
  ☆63Updated 9 months ago
• apolselli / home-assistant-config
  ☆28Updated 3 years ago
• AlexMekkering / esphome-config
  My main ESPHome configuration
  ☆104Updated 3 months ago
• aquaticus / nexus433
  433MHz temperature and humidity sensor receiver that integrates with home automation systems.
  ☆191Updated last year
• steepleian / weewx-Weather34
  ☆45Updated last year
• trvrnrth / esphome-bsec-bme680
  ESPHome component for the Bosch BME680 sensor via BSEC providing temperature, humidity, pressure and indoor air quality measurements.
  ☆88Updated 2 years ago
• michaelarnauts / cec-mqtt-bridge
  A HDMI-CEC to MQTT bridge for connecting HDMI-CEC-devices to your Home Automation system.
  ☆149Updated last year