clarionut / RP2040VCO
Modified version of the RP2040 based VCO design by Hagiwo
☆12Updated 2 years ago
Alternatives and similar repositories for RP2040VCO:
Users that are interested in RP2040VCO are comparing it to the libraries listed below
- Through-hole PCB version of the HAGIWO "Select" voltage controlled Switch Eurorack module☆12Updated last year
- DOTS eurorack module pcb schematics and code ATMega328 based☆17Updated 4 months ago
- Through hole PCB version of the HAGIWO 005 Generative Sequencer Eurorack module.☆25Updated 2 years ago
- Arduino based Clock Divider☆18Updated 2 months ago
- PCB converion of the HAGIWO envelope follower module.☆15Updated 3 years ago
- Through-hole 4HP PCB version of the HAGIWO distortion eurorack module☆14Updated 2 years ago
- 8-bit perc/drone generator for Eurorack systems☆19Updated 9 years ago
- A multi-stage phase shifter in Eurorack format with up to 12 stages selectable☆21Updated last year
- 4HP simplified version of @musicdevghost chacha VCLFO Eurorack module☆10Updated 2 years ago
- Alternate firmware and scripts for Sync LFO & A-RYTH-MATIK eurorack modules.☆16Updated 3 weeks ago
- A Mutable Instruments Braids clone with the use of the STM32F103 Blue Pill Board.☆22Updated last year
- QUATRO is a quad VCA and mixer based on Veils, by Mutable Instruments. Original design by Émilie Gillet - CC BY-SA 3.0. Through-hole remi…☆20Updated 3 years ago
- ☆12Updated 3 years ago
- A Eurorack DCO module based on the DCO core of the Roland Juno 106☆23Updated 2 years ago
- MS20-VCF clone based on BartonSynth version.☆18Updated 5 months ago
- A 2HP buffered Multiple in Eurorack format.☆12Updated 4 years ago
- A DIY Throughhole variant of the Mutable Instruments Branches☆14Updated 6 months ago
- A slim (width 25mm) Wave Folder Eurorack module, based on the design from YUSYNTH.☆11Updated 4 months ago
- A throughhole version of the Mutable Instruments Grids, a remake as close to the original as possible.☆27Updated 2 months ago
- Eurorack Wavetable VCO based on ElectricDruid VCDO☆16Updated 5 months ago
- A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.☆36Updated 2 years ago
- A MCP4821 version of Hagiwo Quantizer☆16Updated 3 years ago
- Modular analog electro acoustic noise machine.☆30Updated 10 months ago
- Eurorack DIY Clone of Mutable Instruments Rings☆10Updated 5 months ago
- OTA VC Filter Module in Eurorack Format☆13Updated last year
- Chaotic 4-channel CV generator Eurorack module☆10Updated 8 months ago
- An Echo/Delay Module for Eurorack, based on the PT2399☆10Updated last year
- A Euclidean sequencer / Euclidean rhythm generator based on an arduino nano☆18Updated last year
- Tuna - Eurorack tuner module☆12Updated 2 years ago
- A through-hole reverb module for Eurorack based around the Daisy Seed by Electrosmith☆19Updated last year