cjbrigato / proxmark-cjmark-designsLinks
ProxmarkIII mods and designs made for the wild
☆13Updated 8 years ago
Alternatives and similar repositories for proxmark-cjmark-designs
Users that are interested in proxmark-cjmark-designs are comparing it to the libraries listed below
Sorting:
- Proxmark3 rvd4.0 adaptation based iceman fork☆14Updated 6 years ago
- Proxmark 3 - HID Corporate 1000 bruteforce 35 bit cards☆35Updated 8 years ago
- Modified proxmark3 firmware to perform brute forcing of 26-Bit ProxCards☆62Updated 8 years ago
- iClass / Picopass tool for libnfc☆56Updated 4 years ago
- !!! Deprecated, see www.rfid-tool.com instead !!! The ESP-RFID-Thief is a port of the Tastic RFID Thief to the ESP12S chip with the addit…☆88Updated 7 years ago
- NFC MiTM made with two PN532 readers and a Raspberry Pi.☆28Updated 8 months ago
- Yet another Multipurpose Breakout Board to hack hardware in a clean and easy way☆31Updated last year
- Integrating some Major Malfunction tools for Mag-stripe info☆55Updated 7 years ago
- Magnetic Pentesting tool for Raspberry Pi☆60Updated 5 years ago
- This repository contains a set of InternalBlue patches for the BCM4375B1 Bluetooth controller, allowing to sniff and inject Zigbee, Mosar…☆21Updated 4 years ago
- MagSpoof for Raspberry PI GPIO☆61Updated 8 years ago
- A tool based on libnfc that executes an active authentication and encrypted communication with a CryptoRF tag☆20Updated 4 years ago
- HackRF / RTLSDR Spectrum Scanning Interface (WIP)☆29Updated 8 years ago
- Smartcard APDU interception and MITM for one smartcard model☆39Updated 7 years ago
- Open source PCB the size of a credit card that is capable of detecting the field generated by a RFID reader and identify if it is a LF(12…☆74Updated 7 years ago
- RF430FRL152H examples for NFC Type V in Kicad and C.☆75Updated 5 years ago
- An Android app to read and write MIFARE Ultralight EV1 tags☆21Updated 5 years ago
- Z-Wave Packet Interception and Injection Tool☆35Updated 9 years ago
- USB bootloader for the CC1111 RF SoC (rfcat version)☆33Updated last year
- Hardware design files for the PMOD based MUX☆13Updated 5 years ago
- HydraFW dedicated to HydraBus v1 / HydraNFC Shield v2☆48Updated last month
- ☆23Updated 4 years ago
- The BUSSide Badge☆47Updated 3 years ago
- Magnetic stripe spoofer implementing audio waves.☆39Updated 8 years ago
- Learn to do something new with GreatFET!☆66Updated last year
- An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®☆44Updated last month
- Driving one of those cheap RF1101SE boards with a Arduino or Teensy☆60Updated 8 years ago
- Documentation, gerbers, design and schematic.☆55Updated 5 years ago
- Implement Samy's magspoof on Arduino Nano☆18Updated 9 years ago
- Project Repository for the NFC Resonant Repeater project☆29Updated 7 months ago