bzeiss / mister-pcbsLinks
PCBs for the Mister FPGA project.
☆13Updated 3 years ago
Alternatives and similar repositories for mister-pcbs
Users that are interested in mister-pcbs are comparing it to the libraries listed below
Sorting:
- A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to bui…☆61Updated 3 months ago
- A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.☆37Updated 3 years ago
- Digital output for Roland MT-32, D10/20/50/etc☆12Updated 6 months ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆53Updated 10 months ago
- The latest iteration of my hardware Sega Genesis/Megadrive Video Game Music Player☆53Updated 3 years ago
- A hardware YM2151 Video Game Music (VGM) player with PCM audio support☆20Updated 2 years ago
- OPL3 VGM player powered by STM32☆64Updated 4 years ago
- ☆18Updated last year
- Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.☆16Updated 5 months ago
- OPL-compatible driver for Yamaha YMF825 (SD-1)☆39Updated 2 years ago
- Sega flash multicart for SC-3000, SG-1000 and Mark III based on Pico Clone☆27Updated 8 months ago
- MT32-PI.EXE/MT32-PI.TTP/mt32-pi-ctl is a control program for the mt32-pi MIDI synthesizer available for DOS PCs, Atari ST and Amiga compu…☆50Updated last year
- A microprocessed RGB to HDMI Converter with USB capture☆101Updated last year
- The v.st Colour Mod - a colour vector generator based on the original v.st☆62Updated last week
- Gravis Ultrasound emulator on an ISA card, using bare metal on a Raspberry Pi 3/4/CM4☆57Updated 2 years ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 8 years ago
- Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation☆39Updated 3 weeks ago
- Converts PC floppy drive interface to Amiga/Shugart bus interface. Now also supports the Atari ST/TT.☆49Updated 3 years ago
- Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga☆24Updated 2 years ago
- 3D printable version of the Roland MT-32 MIDI synthesizer☆17Updated 4 years ago
- Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using☆14Updated 5 months ago
- A PCB for creating Amiga SCART or Amiga VGA cables. You can also use this adapter to feed a new clock to the Amiga via XCLK making your m…☆25Updated 3 years ago
- Commodore/CBM IEC Adapter for MiSTer FPGA☆13Updated 2 years ago
- A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also…☆43Updated last year
- A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi☆55Updated 3 months ago
- Solution for multisync switch for Atari ST/STE.☆32Updated 4 years ago
- Source code for the popular SwinSID SID replacement☆58Updated 2 years ago
- X68000 RAM Expansion☆37Updated 3 years ago
- ISA sound card based on the SAA1099 sound generator☆37Updated 7 years ago
- Open source SID 8580/6581 emulator that can be executed on Bluepill boards and STM32F103☆29Updated 3 months ago