Alternatives and similar repositories for dev-expansion-card:

Users that are interested in dev-expansion-card are comparing it to the libraries listed below

• jeffmakes / pi-data-recovery
  Recovering data from a bricked Raspberry Pi CM4. Same method would work on other Pis / SBC's
  ☆78Updated 2 years ago
• EvanKrall / pipad
  A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.
  ☆58Updated last year
• HarveyBates / kandle
  A CLI that automatically imports external components into a KiCad project.
  ☆34Updated last year
• jyancat / Serial-Expansion-Card
  ☆18Updated 8 months ago
• RainbowLabsDE / PDBrick
  A 1.7kW USB-C PD power supply
  ☆101Updated last year
• TobleMiner / oled-nametag
  A ESP32-based OLED nametag
  ☆51Updated last year
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆8Updated 2 years ago
• mitxela / PrecisionClockMkII
  ☆74Updated 10 months ago
• mitxela / amulet
  ☆41Updated 3 years ago
• mitxela / PrecisionClock-Hardware
  ☆32Updated 2 years ago
• bluepylons / USB-C-3-way-splitter
  A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
  ☆32Updated 3 weeks ago
• nickandre / dnvt-fw
  ☆30Updated 2 years ago
• splitbrain / pinoutleaf
  Create printable pinout diagrams
  ☆94Updated this week
• kbeckmann / uart-audio
  Audio out with an FTDI UART cable
  ☆43Updated 4 years ago
• viktak / TPM-H370
  TPM 2.0 Module for Gigabyte H370 series motherboards
  ☆75Updated 2 years ago
• Inne-Lemstra / soft_soldering_jig
  Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them…
  ☆19Updated 4 years ago
• CarlBugeja / PCB-Hot-Plate
  Reflowing PCBs with PCBs!
  ☆88Updated 3 years ago
• klui-freiberg / PowerEver
  Simply turn your power bank into a cool power supply
  ☆12Updated 4 years ago
• iFixit / FixHub
  Resources for working with the FixHub Power Series Smart Soldering Iron and Power Station.
  ☆29Updated 3 months ago
• SudoMaker / PICoRNG
  ☆18Updated last year
• prusa3d / Prusa-ESP-Nic-FW
  ESP8266 as generic network interface over UART
  ☆17Updated 8 months ago
• adafruit / Adafruit_seesawPeripheral
  Arduino library for making seesaw peripherals using Arduino core!
  ☆27Updated 7 months ago
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆30Updated 7 months ago
• mayermakes / Engineering-Resin
  MAYER MAKES Engineering Resin, Material Safety datasheets, technical information and Slicer settings
  ☆11Updated 8 months ago
• l00nix / rpi-cm4-LiM-board
  A minimalistic Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board.
  ☆42Updated 2 years ago
• FrameworkComputer / qmk_firmware
  Fork of QMK for the Framework Laptop 16
  ☆109Updated 3 months ago
• Diodes-Delight / Piunora-Hardware
  Design files and schematic for Piunora
  ☆51Updated last year
• blueOkiris / ch552g-dev-board
  A simple breakout board with minimal hardware design for the CH552g
  ☆18Updated last year
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• pinout-xyz / pico.pinout.xyz
  Raspberry Pi Pico Pinout Page
  ☆31Updated 7 months ago